Few pics of my 2015 CT200h F-Sport
The following users liked this post:
LNXT200 (04-02-17)
#4
Moderator
Congratulations on getting a 2015 CT. Looks good and keep up the work...
#7
I got them wrapped at Aerowerkz Motorsport. I tried to get Don Nguyen but he doesn't wrap on weekends. Also just got Morimoto HID's for both lowbeams and fogs. I'll probably install them end of this coming week.
Just got my lifetime alignment done over at Firestone on Bristol and got my camber bolts installed there. Took them a little over 2 hours. They drove my car around and adjusted the cambers accordingly 4x to get it perfect, or close to it. Told me to come back in 3-4 weeks to get it done again if I wanted. Nice guys over there.
Just got my lifetime alignment done over at Firestone on Bristol and got my camber bolts installed there. Took them a little over 2 hours. They drove my car around and adjusted the cambers accordingly 4x to get it perfect, or close to it. Told me to come back in 3-4 weeks to get it done again if I wanted. Nice guys over there.
Trending Topics
#10
- 19x8.5 +45 AG M510 Matte black
- 235/35 Nitto Invos
I don't even rub going up driveways slowly, I just fear of scraping the front bumper for the car being so low. I only hear the front tires 'slightly' rub when I hit quick 'mini dips' on the freeway or maybe some residential areas going at a fast speed.
Window trim with window visor trim cost me $250 with the front chrome garnish with 1 year warranty on the work. 10 years on the vinyl.
#11
Looks good. Makes me want to put 19's on mine. Rear spacers would help make the rear rims look flush like the fronts.
Wow, $250 for that vinyl job. They didn't even do the lower grille surround...
Wow, $250 for that vinyl job. They didn't even do the lower grille surround...
#12
Lexus Test Driver
iTrader: (2)
- Tanabe Sustec Coilovers
- 19x8.5 +45 AG M510 Matte black
- 235/35 Nitto Invos
I don't even rub going up driveways slowly, I just fear of scraping the front bumper for the car being so low. I only hear the front tires 'slightly' rub when I hit quick 'mini dips' on the freeway or maybe some residential areas going at a fast speed.
Window trim with window visor trim cost me $250 with the front chrome garnish with 1 year warranty on the work. 10 years on the vinyl.
- 19x8.5 +45 AG M510 Matte black
- 235/35 Nitto Invos
I don't even rub going up driveways slowly, I just fear of scraping the front bumper for the car being so low. I only hear the front tires 'slightly' rub when I hit quick 'mini dips' on the freeway or maybe some residential areas going at a fast speed.
Window trim with window visor trim cost me $250 with the front chrome garnish with 1 year warranty on the work. 10 years on the vinyl.
#13
Driver School Candidate
Join Date: May 2015
Location: NC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I got them wrapped at Aerowerkz Motorsport. I tried to get Don Nguyen but he doesn't wrap on weekends. Also just got Morimoto HID's for both lowbeams and fogs. I'll probably install them end of this coming week.
Just got my lifetime alignment done over at Firestone on Bristol and got my camber bolts installed there. Took them a little over 2 hours. They drove my car around and adjusted the cambers accordingly 4x to get it perfect, or close to it. Told me to come back in 3-4 weeks to get it done again if I wanted. Nice guys over there.
Just got my lifetime alignment done over at Firestone on Bristol and got my camber bolts installed there. Took them a little over 2 hours. They drove my car around and adjusted the cambers accordingly 4x to get it perfect, or close to it. Told me to come back in 3-4 weeks to get it done again if I wanted. Nice guys over there.
I was thinking:
XB35 (35W)
H11B XB 4500k
Morimoto XB Igniter (AMP)
HD Relay or Canbus (Can't decide)
#14
Yes. I went with:
XB35 (35W)
H11B XB 5500k
Morimoto XB Igniter (AMP)
HD Relay for the fogs
Canbus for low beams
You have to go with relays for the fogs and canbus for the low beams. I went canbus for both; fogs were flickering. Swapped them out for relays and no problems since. It's best to remove the front bumper when you do the fogs.
#15
Driver School Candidate
Join Date: May 2015
Location: NC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Yes. I went with:
XB35 (35W)
H11B XB 5500k
Morimoto XB Igniter (AMP)
HD Relay for the fogs
Canbus for low beams
You have to go with relays for the fogs and canbus for the low beams. I went canbus for both; fogs were flickering. Swapped them out for relays and no problems since. It's best to remove the front bumper when you do the fogs.
Are the fog lights really H11 as well? I'm thinking about going with these.