2014 Spindle Bumper and F-Sport Spoiler available on 2011-2013
#77
Mine is starfire pearl; with fogs. The paint job is supposed to not cost beyond $150. Mine went just 8,000 km before I swapped, and its basically spot free. Alas, it has a 3M wrap on it that will have to go if repainted. Oh, I am in Canada, so perhaps beyond easy reach anyways.
#78
Driver School Candidate
Join Date: Apr 2012
Location: California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
For those who did the upgrade, how long did it take for the packages to arrive (from the date of ordered to the date of received)?
And also how long does it take to install the whole front bumper?
Thanks
And also how long does it take to install the whole front bumper?
Thanks
#79
Driver School Candidate
Join Date: Nov 2011
Location: IN
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
#80
It took me a couple hours. Removing packaging and placing them right was about half hour (they really package it well), trying to think of a proper location for the no holes license plate was half hour, https://www.clublexus.com/forums/ct-...in-the-is.html
Trying to yank out the Lexus emblem was another half hour (this one was a bit of a PITA) http://www.ct200hforum.com/forum/lex...us-emblem.html.
As I got LED fog lamps as well, mounting the fog lamps, and transferring the wiring from the old bumper to the new one was another half hour.
Double checking so that all bolts and tabs were properly connected took another half hour.
My only suggestion given my experience would be to ask Sewell to not paint it. 1. it takes time for them to do it, 2. They couldn't match the paint for my Starfire Pearl, and I ended up getting it repainted by my local paint shop. Well, I am told Starfire Pearl has many variations and it is very difficult to match, but mine came out looking more like Ultra White rather than SP. It is much easier for your local paint guy to match it with rest f the body when they see it in person. Again just from my experience, Sewell is not really that great in responding back if you have a special request. Good luck!
Last edited by LoveCT; 11-19-14 at 05:16 PM.
#82
Driver School Candidate
Join Date: Oct 2015
Location: AE
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Did you ever get an answer or pull the trigger on upgrading the f sport grille? I'm thinking of doing the same for my 15 CT.
#84
Yes, that's the kit I purchased from Sewell. LED fogs and all mounting hardware were included as well and yes I did switch out the fogs to the LEDs.
Headlamps are HID, purchased the kit through DDM tuning here in San Diego locally. A lot of forum members have them as well....
Headlamps are HID, purchased the kit through DDM tuning here in San Diego locally. A lot of forum members have them as well....
#85
I'm stuck at the foglights for my bumper upgrade. I've invested WAAAAAY too much time and money on this upgrade and my body guy is at a stopping point. I'm wanting to use the original foglights from my 2013 and when I initially ordered this stuff about 3 months ago, I thought that I had read where the pre-face lift foglights could be modified to work. For those who have successfully upgraded to this front-end and used the original foglights, do I need to order new brackets or is there some modifications that can be done to make them work?
#86
I'm stuck at the foglights for my bumper upgrade. I've invested WAAAAAY too much time and money on this upgrade and my body guy is at a stopping point. I'm wanting to use the original foglights from my 2013 and when I initially ordered this stuff about 3 months ago, I thought that I had read where the pre-face lift foglights could be modified to work. For those who have successfully upgraded to this front-end and used the original foglights, do I need to order new brackets or is there some modifications that can be done to make them work?
See post #4 with list of material, bracket fog lamp is what you need.
The following users liked this post:
CTFSportSE (07-18-17)
#87
http://www.ct200hforum.com/forum/lex...er-2012-a.html
See post #4 with list of material, bracket fog lamp is what you need.
See post #4 with list of material, bracket fog lamp is what you need.
Thread
Thread Starter
Forum
Replies
Last Post
Ling2IS
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
1
07-23-18 10:26 AM