Ok, here's the update for today. What a LOOOONG day of trouble shooting and figuring stuff out. Anyway, just to let people know, taking the bumper off is a pain in the ***. Anyway, I was hoping to make a really nice conversion harness with stock male and female connectors, but I got lazy/cheap. I went to the toyota dealership to try and order the connectors, but I ended finding out two things. Some of the connectors are EXPENSIVE, one connector of which I need two, is 32 dollars alone. The second thing I found out, was that even though I had the part number, there was really no way for me to know if that was a male or female connector unless I looked in this damn book which had HUNDREDS of pages of connectors that are either male or female so I gave up on that. I ended up just going to the electronics store here and buying a bunch of spade connectors with the male parts and then making a ghetto rig up. BUUUTT, it worked just fine
The high beams, the low beams, the DRL works, and so do the turn signals. The only thing I am going to try to do tmrw is try to get the corner light to light up. I also have to wait till next week to get the other LED control module so that I can hook up both, but in the mean time, I know the headlights work
See pictures below.
1. Picture of my ghetto rig harness (I covered it later with wireloom and I am going to shrink wrap the ends)
2. Picture of the headlights on with everything except the DRL
3. Picture of the headlights on with only the low beams on and the DRL's fixed.
4. Picture of both headlights on (left from your perspective is halogen, right is LED)(without the DRL, had to make an adjustment then it worked, see the #3 picture) and the white block is my license plate
and P.S. sorry for exposing you guys to my naked bumper!! :-p