Official "MODDED" CT200h picture thread!
The following users liked this post:
SFarmer (12-25-16)
#408
Driver School Candidate
Join Date: Jan 2017
Location: CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Contemplating on adding injen sri with heat shield, and gold heat wrap on the tube. Any thoughts...is it worth it???
Thanks Sound deadening and speakers project <br ><br > <br > <br > <br > <br > <br > <br > Stock rims in chameleon plastidip+dragon eyes tint<br ><br >[IMG]https://cimg8.ibsrv.net/gimg/www.clublexus.com-vbulletin/2000x2000/80-image_e1
Thanks Sound deadening and speakers project <br ><br > <br > <br > <br > <br > <br > <br > Stock rims in chameleon plastidip+dragon eyes tint<br ><br >[IMG]https://cimg8.ibsrv.net/gimg/www.clublexus.com-vbulletin/2000x2000/80-image_e1
#409
Driver
Everyone's car looks great!
A few companies wanted some photos of my car with their aftermarket parts on it so I took pictures today which was the first sunny day we've had in a while. I just got the bumper and rocker panel fixed and I put them on yesterday. I am going to be removing all the bits of vinyl on it and changing it up completely in the spring and I am also going to try making a splitter but these will do for now:
A few companies wanted some photos of my car with their aftermarket parts on it so I took pictures today which was the first sunny day we've had in a while. I just got the bumper and rocker panel fixed and I put them on yesterday. I am going to be removing all the bits of vinyl on it and changing it up completely in the spring and I am also going to try making a splitter but these will do for now:
#410
Instructor
^Steve,
Your car looks terrible, especially the wheels and the brakes.
Donate me those, to take me out of your misery
(haha)
JK man, gorgeous, my favorite setup here!
Your car looks terrible, especially the wheels and the brakes.
Donate me those, to take me out of your misery
(haha)
JK man, gorgeous, my favorite setup here!
The following users liked this post:
SteveMason (01-23-17)
#412
Driver
Suddenly my car didn't feel too hot yesterday though when I picked up some vinyl... Unfortunately it's the one in the back
Last edited by SteveMason; 01-26-17 at 06:53 PM.
#414
Driver School Candidate
Join Date: Oct 2012
Location: Luxembourg
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Everyone's car looks great!
A few companies wanted some photos of my car with their aftermarket parts on it so I took pictures today which was the first sunny day we've had in a while. I just got the bumper and rocker panel fixed and I put them on yesterday. I am going to be removing all the bits of vinyl on it and changing it up completely in the spring and I am also going to try making a splitter but these will do for now:
A few companies wanted some photos of my car with their aftermarket parts on it so I took pictures today which was the first sunny day we've had in a while. I just got the bumper and rocker panel fixed and I put them on yesterday. I am going to be removing all the bits of vinyl on it and changing it up completely in the spring and I am also going to try making a splitter but these will do for now:
Could you please share the names and links for all your parts ?
size and brand of rims?
front and backaerodynamics ? both carbon fiber?
Simply amazing!
#415
Driver
my goal was to try and make it look more like an is-f or a slightly higher end car without looking too "modified".... However what I have in mind next will start to look more "modified" as moding is a disease only cured by poverty! Hahaha
http://www.ebay.com/itm/282233299620?ul_noapp=trueIt isn't the greatest build quality but for the price it does the job and looks great. The carbon fiber you see is real but it's main body is plastic.
Rear spoiler
It is an OEM 2014 F-sport spoiler in all black (I wish it were carbon fiber!)
Wheels
Niche M116 19x8.5 5x100 with a 20mm spacer in the back. I wish Niche made a 9.5" width for the rear so I could ditch the spacer but they don't in our bolt pattern.
Center Caps
I also attached some OEM Lexus caps to the Niche center caps because Lexus center caps are about 5mm too small. see my tutorial
Front Brakes
The brakes are Ceika performance brakes with 8 pot orange calipers and 14" drilled and slotted rotors. The rear brakes are just stock with orange painted calipers.
Lowering Springs
The suspension is the blue F-sport springs with about a 3/4" lower.
F Sport Badge
It is from an IS3 and I added black vinyl to it.
Some other mods you can't see in the pictures is my dual center cat back exhaust I just got from Jiajun Exhaust on alibaba in 2014 but they don't seem to sell it anymore. I have an injen air intake and all LED light swap. I also have gloss black vinyl on the mirrors and pillars as well as tinted windows.
hope this helps!
(I personally think oldwineguy wins for best ct200h but thanks!)
Last edited by SteveMason; 01-31-17 at 11:14 AM. Reason: cleaned up post and added more links
#417
Lead Lap
Thanks!
my goal was to try and make it look more like an is-f or a slightly higher end car without looking too "modified".... However what I have in mind next will start to look more "modified" as moding is a disease only cured by poverty! Hahaha
Front spoiler
It isn't the greatest build quality but for the price it does the job and looks great. The carbon fiber you see is real but it's main body is plastic.
Rear spoiler
It is an OEM 2014 F-sport spoiler in all black (I wish it were carbon fiber!)
Wheels
Niche M116 19x8.5 5x100 with a 20mm spacer in the back. I wish Niche made a 9.5" width for the rear so I could ditch the spacer but they don't in our bolt pattern.
Center Caps
I also attached some OEM Lexus caps to the Niche center caps because Lexus center caps are about 5mm too small. see my tutorial
Front Brakes
The brakes are Ceika performance brakes with 8 pot orange calipers and 14" drilled and slotted rotors. The rear brakes are just stock with orange painted calipers.
Lowering Springs
The suspension is the blue F-sport springs with about a 3/4" lower.
F Sport Badge
It is from an IS3 and I added black vinyl to it.
Some other mods you can't see in the pictures is my dual center cat back exhaust I just got from Jiajun Exhaust on alibaba in 2014 but they don't seem to sell it anymore. I have an injen air intake and all LED light swap. I also have gloss black vinyl on the mirrors and pillars as well as tinted windows.
hope this helps!
(I personally think oldwineguy wins for best ct200h but thanks!)
my goal was to try and make it look more like an is-f or a slightly higher end car without looking too "modified".... However what I have in mind next will start to look more "modified" as moding is a disease only cured by poverty! Hahaha
Front spoiler
It isn't the greatest build quality but for the price it does the job and looks great. The carbon fiber you see is real but it's main body is plastic.
Rear spoiler
It is an OEM 2014 F-sport spoiler in all black (I wish it were carbon fiber!)
Wheels
Niche M116 19x8.5 5x100 with a 20mm spacer in the back. I wish Niche made a 9.5" width for the rear so I could ditch the spacer but they don't in our bolt pattern.
Center Caps
I also attached some OEM Lexus caps to the Niche center caps because Lexus center caps are about 5mm too small. see my tutorial
Front Brakes
The brakes are Ceika performance brakes with 8 pot orange calipers and 14" drilled and slotted rotors. The rear brakes are just stock with orange painted calipers.
Lowering Springs
The suspension is the blue F-sport springs with about a 3/4" lower.
F Sport Badge
It is from an IS3 and I added black vinyl to it.
Some other mods you can't see in the pictures is my dual center cat back exhaust I just got from Jiajun Exhaust on alibaba in 2014 but they don't seem to sell it anymore. I have an injen air intake and all LED light swap. I also have gloss black vinyl on the mirrors and pillars as well as tinted windows.
hope this helps!
(I personally think oldwineguy wins for best ct200h but thanks!)
#418
Lead Lap
#420
Driver School Candidate
Join Date: Feb 2017
Location: California
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2015 base
Fire Agate Pearl
Bc racing coils
14k fronts // 12k rears
Megan rear camber arms cut and welded to manipulate more degrees of camber
Fenders rolled and pulled to fit my Work Vsxx
Front: 18x9 +15 205/40/18
Rear: 18x10.5 +5 225/40/18
Junction Produce neck cushions
Vip tables being built by me (taking forever)
Curtains being made by me (taking forever)
Fire Agate Pearl
Bc racing coils
14k fronts // 12k rears
Megan rear camber arms cut and welded to manipulate more degrees of camber
Fenders rolled and pulled to fit my Work Vsxx
Front: 18x9 +15 205/40/18
Rear: 18x10.5 +5 225/40/18
Junction Produce neck cushions
Vip tables being built by me (taking forever)
Curtains being made by me (taking forever)