New CL Vendor Sikky Manufacturing
#1
Sikky Manufacturing
Hey Guys
Sikky is pleased to announce we are now a vendor on ClubLexus! We’re here for any product questions
or sales inquires you may have. Just shoot us a PM, email ( sales@sikky.com) or give us a ring at 410-
780-0009. My name is Justin and I will gladly help with anything you may need.
For those who may be unfamiliar with our products I’ll give you a quick rundown on what we currently
offer for Lexus’.
IS-F Headers:
Our headers have been proven time and time again to produce roughly 50whp! Our team of engineers
designed them here in house from the ground up and not a single detail was over looked. From the
raised welds at ports to provide superior gasket sealing, to the ceramic coating that can withstand
temps of over 1300 degrees, these headers are made to the highest of standards. Check them out here
on our website!
http://www.sikky.com/view_item.php?id=148&catid=15
IS-F, IS250, IS350 Rear Sway Bars:
This 3-way adjustable strait bar design allows for fine tuning no matter what your setup may be. The
sway bar includes heavy duty corrosion resistant endlinks with reverse thread turn buckles so you are
able to adjust the preload when installed. The softest setting on these bars is approximately 50%
stiffer than stock leaving you 2 more options. The middle is around 90% stiffer and stiffest setting is
170% stiffer. Head on over to our website to check these out!
http://www.sikky.com/view_item.php?id=162&catid=14
Also you can check out the MotoIQ Project IS-F which running our sway bar and they’ve done a write up on it here:
http://www.motoiq.com/magazine_artic...-and-pads.aspx
Let me know if you guys have anything I can help you with!
Sikky is pleased to announce we are now a vendor on ClubLexus! We’re here for any product questions
or sales inquires you may have. Just shoot us a PM, email ( sales@sikky.com) or give us a ring at 410-
780-0009. My name is Justin and I will gladly help with anything you may need.
For those who may be unfamiliar with our products I’ll give you a quick rundown on what we currently
offer for Lexus’.
IS-F Headers:
Our headers have been proven time and time again to produce roughly 50whp! Our team of engineers
designed them here in house from the ground up and not a single detail was over looked. From the
raised welds at ports to provide superior gasket sealing, to the ceramic coating that can withstand
temps of over 1300 degrees, these headers are made to the highest of standards. Check them out here
on our website!
http://www.sikky.com/view_item.php?id=148&catid=15
IS-F, IS250, IS350 Rear Sway Bars:
This 3-way adjustable strait bar design allows for fine tuning no matter what your setup may be. The
sway bar includes heavy duty corrosion resistant endlinks with reverse thread turn buckles so you are
able to adjust the preload when installed. The softest setting on these bars is approximately 50%
stiffer than stock leaving you 2 more options. The middle is around 90% stiffer and stiffest setting is
170% stiffer. Head on over to our website to check these out!
http://www.sikky.com/view_item.php?id=162&catid=14
Also you can check out the MotoIQ Project IS-F which running our sway bar and they’ve done a write up on it here:
http://www.motoiq.com/magazine_artic...-and-pads.aspx
Let me know if you guys have anything I can help you with!
Last edited by SikkyMFG; 11-08-12 at 02:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Dnfwm
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
3
04-11-16 06:50 AM