Club Lexus Vendor Marketplace The place to find group buys and great deals from ClubLexus' supporting vendors.

Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!

Thread Tools
 
Search this Thread
 
Old 03-15-15, 07:18 PM
  #91  
jleonard71
Intermediate
 
jleonard71's Avatar
 
Join Date: May 2011
Location: AZ
Posts: 483
Likes: 0
Received 4 Likes on 3 Posts
Default

Originally Posted by Sean
Taken about 5 minutes ago. As you can see, there is definitely more room at my ride height. I may go with wider tires when I get around replacing them, but I hate rubbing and scraping so much that I'm hesitant to change that or go any lower.



I love these!! How much for a set with the following specs, and how long would turnaround be?

19x9 +38
19x10.5 +55

I am planning to run 255/35 & 295/30 on stock height, with no plans to lower in the future. Think I'll be alright with those offsets? I was running 19x10 +50 w/295's before and there was plenty of room, and by my calculations a 19x10.5 +56.35 w/295 will have the exact same clearance. So I went with 55 which should put them about 1.35mm further out than previously which should be just perfect.
Old 03-17-15, 03:25 PM
  #92  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres the first set of F14s we did in Full Polish with clearcoat for a C63!

Attachment 494762
Attachment 494763
I'm not too sure how I feel about these... but its definitely something sexual.... WOW!!
Old 04-10-15, 03:49 PM
  #93  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres a set of 19x9.5 19x11 Bronze Burst F14s shipped out with some 255/305 Hankooks for Garrett!

Attachment 494610
Attachment 494611
Attachment 494612
Old 04-23-15, 04:53 PM
  #94  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres is the very first set of CF5s we just finished in upgraded Matte Antique Bronze finishing!
Attachment 494567
Love how these came out, they'll be going on a black C5 Corvette with Bronze Accents!
Old 05-06-15, 02:26 PM
  #95  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres a set of F14s we had done in an upgraded custom Brushed Turquoise finish
Attachment 494515

Here they are installed on our customer's 370Z!
Originally Posted by Merv
So I had a chance to get my wheels on and snap a few pics,but not with a good camera. Even with the iPhone camera,these wheels look amazing! Although they don't do these rims justice like seeing them in person.
Thanks again Jason. I'm really happy with the brush job you guys did on the wheels.








Old 05-08-15, 03:50 PM
  #96  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres a set of Forgestar F14s in our popular upgraded Matte Candy Red powdercoat finish!
Thanks to Thirty_Seven for sharing

Originally Posted by Thirty_Seven
Hopefully you guys don't mind me posting in here but I just wanted to say thanks again to the guys at GetYourWheels. I'm digging my Forgestars more and more every day. Couldn't have had a better experience!

Not a color combo you'd see everyday but it works well!
Old 05-22-15, 05:02 PM
  #97  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

One of our customers had trouble deciding between the Matte Candy Red or the Matte Antique Bronze upgraded finishing for his M6 Grand Coupe... so he went with a set in each finish!

Matte Candy Red F14s in 20x9.5 20x11 SDC installed, wrapped in Pirelli P Zeros!
Name:  mUyShOo.jpg
Views: 15
Size:  111.3 KB
Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!-jlqo11f.jpg
Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!-hpumklj.jpg
Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!-4uwiale.jpg
Name:  jVkyp7a.jpg
Views: 15
Size:  107.5 KB

You can never go wrong with black/red combo, aggressive!


Up next is an identical set of Matte Antique Bronze F14s wrapped in Michelin PSS
Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!-cftcpcd.png

Installed:
Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!-xxlbxgf.jpg
Name:  KuhdIH6.jpg
Views: 15
Size:  127.3 KB
Name:  Tlu8Kql.jpg
Views: 15
Size:  132.2 KB

Which color combo do you like best?
Which would you use for your daily driven set?


Contact me at Jason@Getyourwheels.com or 562-219-2525 with any questions!
Old 06-05-15, 12:31 PM
  #98  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Finished up a set of 19x9.5 Deep Concave 19x11 SDC F14s for a G35Coupe in an upgraded Brushed Antique Copper finish!

Attachment 494276
Attachment 494277

This is the first set of F14s in this finish and I love how they came out!

Here they are installed
Name:  YzRXpdW.jpg
Views: 15
Size:  185.3 KB

Contact me @ Jason@GetYourWheels.com with any questions!
Old 06-08-15, 03:47 PM
  #99  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres a set of F14s in 19x9.5 19x11SDC in Gloss Bronze Burst on a 370Z.
I get requests all the time for bronze burst on black so heres a few shots!

Originally Posted by darkside370z
big thanks to jason, finally got my bronze burst f14s installed. mounted on stock tires lowered with swifts :tup:



Old 06-12-15, 02:19 PM
  #100  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

A few new shots of our customer's black 370Z on Bronze Burst F14s, this time with some better lighting!
One of my favorite color combos for sure
Originally Posted by darkside370z
went outside and tried to get some better pics in direct sun light to show how they change colors depending on the way the light hits them






And heres a shot of our customer's Maxima running the first set of SDC F14s in the rear!

Originally Posted by jperez77
Here are my 20x10.5s front and rear on my 06 Maxima. Thanks to Getyourwheels.com and Jason for the wheels.
Old 06-16-15, 04:12 PM
  #101  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Here is a set of 22x10 F14s we built for our customer's brand new Cayenne Diesel in Matte Black

Originally Posted by powdercoatmike
I already had the wheels waiting as I ordered them from GetYourWheels right after I placed the order for the truck. They are 22" Forgestar F-14s

Today I powdercoated the calipers lambo orange, just like the last one, installed low dust pads and got the wheels on.

I am really loving this air suspension! Looks much better parked lower!


Love the Lambo Orange calipers!



We're also excited to share some of the first photos of the 19x10 CF5Vs in Super Deep Concave!
Attachment 494198
Attachment 494199
Attachment 494200
Currently only 19x10 available, and limited inventory.

The SDC wont fit all cars so contact me for the best recommended fitment for yours!
Old 06-23-15, 03:25 PM
  #102  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres a set of F14s in one of our most stunning upgraded custom finishes: Gloss Brushed Candy Red!
Attachment 494177
Attachment 494178
Attachment 494179
Old 07-01-15, 03:55 PM
  #103  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Take a look at this Forgestar CF5 sporting a brand new Satin Bronze powdercoat we now offer as a standard finish!

Attachment 494142
Attachment 494143
Attachment 494144

It has a nice almost anodized look to it with a little bit of metallic flake!
Great option if you're looking for something a little different than the always popular Bronze Burst
Old 07-09-15, 03:04 PM
  #104  
GetUrWheel
Former Sponsor
Thread Starter
iTrader: (2)
 
GetUrWheel's Avatar
 
Join Date: Jun 2011
Location: CA
Posts: 3,442
Received 44 Likes on 42 Posts
Default

Heres an insane track setup we put together with Forgestar F14s wrapped in massive Hoosier Slicks... you'll never guess what car these are for!
Name:  eCAGJ58.png
Views: 15
Size:  89.6 KB

Give up?
These are going out to a full race prepped Saturn Sky!
Old 07-11-15, 06:40 AM
  #105  
Stylnhonda
Lexus Test Driver
iTrader: (1)
 
Stylnhonda's Avatar
 
Join Date: Apr 2011
Location: Louisville
Posts: 910
Likes: 0
Received 0 Likes on 0 Posts
Default

That's sick! ^

Looking for a set of F14's in 19" for a 2015 IS RWD. Can I use a Super Deep for the rear without having to roll/pull fenders?

EDIT: Looks like I will need to go with 19x8.5 35 and 19x9.5 40.

Currently have a set of 22" F14's on order from a different company and it's been 10 weeks. Is Forgestar currently backed up?

Last edited by Stylnhonda; 07-11-15 at 07:21 AM.


Quick Reply: Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!



All times are GMT -7. The time now is 02:39 PM.