Ichiba Version II wheel spacers
06-28-11, 12:57 PM
#1
Former Sponsor
Thread Starter
Join Date: May 2011
Location: CA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Ichiba Version II wheel spacers
Hey guys,
want to make your wheels more flush but dont want to get a new set with different offsets just to get the look your trying to achieve? look no further!
Ichiba Version II wheel spacers come with the studs already in the Spacer, This kit would require you to take a look at the Wheels you have to make sure that the back pad of the wheel (where the lugs go through) have indentations next to it, allowing the left over factory stud to come through.
Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers are two pieces design with pressed studs. Now it's time to bolt-on without any swap studs hassles.
These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.
Retail Pricing on 15mm,20,mm,25mm kits is 135.00 WITHOUT SHIPPING!
Retail Pricing on 30mm and 38mm kits is 155.00 WITHOUT SHIPPING!
CLUB LEXUS MEMBER PRICING
15mm,20,mm,25mm kits are 120.00 SHIPPED TO LOWER 48! CA add 9.75% tax
30mm and 38mm kits are 140.00 SHIPPED TO LOWER 48! CA add 9.75% tax
if you would like to place more than one order no problem!
if you would like 15mm,20,mm,25mm spacers add 115$ to your order!
if you would like 30mm and 38mm spacers add 120$ to your order!
PM US FOR PAYMENT INFO
All parts purchased follow into terms and agreement on our website www.STRAFEAUTOMOTIVE.com
want to make your wheels more flush but dont want to get a new set with different offsets just to get the look your trying to achieve? look no further!
Ichiba Version II wheel spacers come with the studs already in the Spacer, This kit would require you to take a look at the Wheels you have to make sure that the back pad of the wheel (where the lugs go through) have indentations next to it, allowing the left over factory stud to come through.
Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers are two pieces design with pressed studs. Now it's time to bolt-on without any swap studs hassles.
These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.
Retail Pricing on 15mm,20,mm,25mm kits is 135.00 WITHOUT SHIPPING!
Retail Pricing on 30mm and 38mm kits is 155.00 WITHOUT SHIPPING!
CLUB LEXUS MEMBER PRICING
15mm,20,mm,25mm kits are 120.00 SHIPPED TO LOWER 48! CA add 9.75% tax
30mm and 38mm kits are 140.00 SHIPPED TO LOWER 48! CA add 9.75% tax
if you would like to place more than one order no problem!
if you would like 15mm,20,mm,25mm spacers add 115$ to your order!
if you would like 30mm and 38mm spacers add 120$ to your order!
PM US FOR PAYMENT INFO
All parts purchased follow into terms and agreement on our website www.STRAFEAUTOMOTIVE.com
Thread
Thread Starter
Forum
Replies
Last Post
Arfboy
3Gen IS250 / IS350 Classifieds (14-)
0
01-10-18 03:50 PM
