IMF SC400 headers holiday special $599!!
#1
Former Sponsor
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
IMF SC400 headers holiday special $599!!
Hello everyone,
I finally became a sponsor on this site and wanted to start by offering a holiday special on the IMF headers for the SC400.
This holiday special is being offered for $599.00 plus shipping. The special pricing is good until 11/15/09 and then it goes back up to $799.00.
Customers and members of this forum are already running this setup on their cars with great power gain.
- made out of 304 stainless steel
- great power gain (CL members who have these can confirm)
- 2 year warranty
Here is a picture of the headers
http://imfabrications.com/images/121...368131478.jpeg
Fits 100% all 92-94 SC400's. 95- and up models require minor modifications to the flanges that connect to the stock y-pipe.
To place an order or if you have any questions please e-mail me to IMFproducts@aol.com or feel free to PM me.
Thanks, Chase
I finally became a sponsor on this site and wanted to start by offering a holiday special on the IMF headers for the SC400.
This holiday special is being offered for $599.00 plus shipping. The special pricing is good until 11/15/09 and then it goes back up to $799.00.
Customers and members of this forum are already running this setup on their cars with great power gain.
- made out of 304 stainless steel
- great power gain (CL members who have these can confirm)
- 2 year warranty
Here is a picture of the headers
http://imfabrications.com/images/121...368131478.jpeg
Fits 100% all 92-94 SC400's. 95- and up models require minor modifications to the flanges that connect to the stock y-pipe.
To place an order or if you have any questions please e-mail me to IMFproducts@aol.com or feel free to PM me.
Thanks, Chase
Last edited by IMF; 11-05-09 at 05:58 PM.
#2
Lexus Test Driver
Join Date: Jul 2004
Location: California
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
These look real nice, 4 into 1! Are you still able to retain all factory systems? Egr system in particular? Will this fit other 1UZ equipped cars, or are you in the design process to make these for other 1UZ equipped cars? GS, LS? A lot of the V8 folks would love the aftermarket support, especially us LS folks since we often get overlooked even though we have the same motors as the sportier cars. Thanks.
#3
Former Sponsor
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
These look real nice, 4 into 1! Are you still able to retain all factory systems? Egr system in particular? Will this fit other 1UZ equipped cars, or are you in the design process to make these for other 1UZ equipped cars? GS, LS? A lot of the V8 folks would love the aftermarket support, especially us LS folks since we often get overlooked even though we have the same motors as the sportier cars. Thanks.
I will be more then happy to make headers that are 100% bolt on for other lexus models but in order to do that i will need at least 25 paying customers to go into production.
#4
Lexus Test Driver
iTrader: (3)
I will vouch for these headers. With my supercharged setup at the time, they took over a tenth and a half off my 1/8 mile time when I put them on. My best 1/8 time before the headers was an 8.686, my best time after the headers and with no other changes was an 8.533. This was with the rest of the exhaust pretty much stock. I then made up my own 2.5 inch dual exhaust and dropped to an 8.431 without any other changes. The headers also added about 3mph. Current low, still using these headers and the same exhaust (but with many other changes as well) is 7.874.
They took me forever to get but I'm pretty sure Chase actually has them in stock now.
I had some minor fitment issues which I won't discuss here, search if you want to know. Wasn't really a big deal and didn't take much to fix.
KC
They took me forever to get but I'm pretty sure Chase actually has them in stock now.
I had some minor fitment issues which I won't discuss here, search if you want to know. Wasn't really a big deal and didn't take much to fix.
KC
#5
Former Sponsor
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
I will vouch for these headers. With my supercharged setup at the time, they took over a tenth and a half off my 1/8 mile time when I put them on. My best 1/8 time before the headers was an 8.686, my best time after the headers and with no other changes was an 8.533. This was with the rest of the exhaust pretty much stock. I then made up my own 2.5 inch dual exhaust and dropped to an 8.431 without any other changes. The headers also added about 3mph. Current low, still using these headers and the same exhaust (but with many other changes as well) is 7.874.
They took me forever to get but I'm pretty sure Chase actually has them in stock now.
I had some minor fitment issues which I won't discuss here, search if you want to know. Wasn't really a big deal and didn't take much to fix.
KC
They took me forever to get but I'm pretty sure Chase actually has them in stock now.
I had some minor fitment issues which I won't discuss here, search if you want to know. Wasn't really a big deal and didn't take much to fix.
KC
Yep, i got them in stock and ready to ship so there is no wait time.
Trending Topics
#10
Former Sponsor
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Anyone who is interested i am giving one set at a steal of a price. $499.00, this price is good for friday the 13 only. One set at the price of $499. dont miss on this deal!
#14
Former Sponsor
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Thank you to those who placed their orders. The headers have shipped and tracking numbers have been sent to your e-mail addresses.
Rob,
I dont know what your user name is and i dont have your e-mail address so if you would like your tracking number E-mail me or PM me with the info, otherwise you should get the headers in about 4 days.
Thanks, Chase
Rob,
I dont know what your user name is and i dont have your e-mail address so if you would like your tracking number E-mail me or PM me with the info, otherwise you should get the headers in about 4 days.
Thanks, Chase
Thread
Thread Starter
Forum
Replies
Last Post
jgscott
Performance & Maintenance
6
02-19-09 09:39 AM