Nigel JDM Parts **LED Board for your Interior & Exterior**

[Nigel-JDMParts]

Originally Posted by LW ES300

Has anyone tried these in the 92-96 ES Series? Could 2 work for front dome like ExTrEmE99 did? But his car is pretty much brand new design vs my 96 ES300 I am thinking 2 LED board for front dome, 1 for front driver door and 1 for front passenger door. If 2 in front are as bright as ExTrEmE99's pic for the front, I will not bother with rear dome - doesn't look like it's needed.

Anyone have any experience with 92-96 generation? Suggestions always welcome. Thanks

I believe their is ONLY 1 PLUG for your front dome (MAP Light.) and you can only put 1 LED board in your front dome. your front door and passenger will only fit some 194 light bulbs. (If your 96ES300 design is same as 97+)

thank you.

[iSuxeL]

Just ordered today Nigel, did you get it? I got my CC

[Nigel-JDMParts]

Originally Posted by iSuxeL

Just ordered today Nigel, did you get it? I got my CC

you ordered 1 board only?
I got an order today with 1 LED board shipped to....................
I dont remember where...

I had been working since friday till today 4 a.m.
I havent sleep more than 6 hours for all these days.

If that's your order, I already ship it.

[LW ES300]

Anyone have any experience with 92-96 generation? Suggestions always welcome. Thanks

I believe their is ONLY 1 PLUG for your front dome (MAP Light.) and you can only put 1 LED board in your front dome. your front door and passenger will only fit some 194 light bulbs. (If your 96ES300 design is same as 97+)
------------------------------------------------------------------------------------

I don't think 97 will be the same as the 92-96 generation since 1997 starts the next generation (1997-2001, I think). From what you say it looks like I can only put the LED board (1) in the front dome/map.

Do you have any way of confirming what you say - I believe their is ONLY 1 PLUG for your front dome (MAP Light.) So I can order one of these from you? It looks like I'm stuck with what I have on the doors, no big deal, but I really want one of these LED boards for the front dome/map. It looks awesome on ExTrEmE99's picture, but he used two so I'll try one.

Let me know if there is any way you can determine that your product can fit. I just went over the electrical schematic on my 92-96 ES300 CD and all it tells is the wiring, not the bulb type/style, etc. Thanks Nigel!

[Nigel-JDMParts]

Originally Posted by LW ES300

Anyone have any experience with 92-96 generation? Suggestions always welcome. Thanks

I believe their is ONLY 1 PLUG for your front dome (MAP Light.) and you can only put 1 LED board in your front dome. your front door and passenger will only fit some 194 light bulbs. (If your 96ES300 design is same as 97+)
------------------------------------------------------------------------------------

I don't think 97 will be the same as the 92-96 generation since 1997 starts the next generation (1997-2001, I think). From what you say it looks like I can only put the LED board (1) in the front dome/map.

Do you have any way of confirming what you say - I believe their is ONLY 1 PLUG for your front dome (MAP Light.) So I can order one of these from you? It looks like I'm stuck with what I have on the doors, no big deal, but I really want one of these LED boards for the front dome/map. It looks awesome on ExTrEmE99's picture, but he used two so I'll try one.

Let me know if there is any way you can determine that your product can fit. I just went over the electrical schematic on my 92-96 ES300 CD and all it tells is the wiring, not the bulb type/style, etc. Thanks Nigel!

If you are worry about if the socket will your socket, which I am sure it will because it has all you need. You only have the find the right socket and connect it with the led board then you are all set.

If you are worry about if the housing is big enough to have the led fit inside there, which I have no idea because I dont have a 96 ES300 to make sure.

thank you

[Mr C35A1]

PM'd you Nigel!

[Nigel-JDMParts]

pm replied.

[AM1]

i just put 5 boards into the interior dome and front dome light, plus one in the trunk. these things are so damn bright. great price though. very easy to put in. thanks nigel !

[iSuxeL]

Just received my LEDs in 3days! Shipping is always on point, thanks Nigel...
BTW it is white right?

[LEP XEP]

PM you nigel

[RemyMartin]

Nigel,

I believe the '03 SC430 only has one map light w/ the 2 side-by-side ON/OFF buttons. The OEM color is not so bright.

What do you recommend for me to purchase for the SC430?
Will the product be easy to replace w/ the current OEM light?

I prefer the blue-color light.

thanks..Remy

[Nigel-JDMParts]

Originally Posted by iSuxeL

Just received my LEDs in 3days! Shipping is always on point, thanks Nigel...
BTW it is white right?

yeah, the one i sent you is white.
i only have white in stock at that time.

Originally Posted by LEP XEP

PM you nigel

replied.

Originally Posted by RemyMartin

Nigel,

I believe the '03 SC430 only has one map light w/ the 2 side-by-side ON/OFF buttons. The OEM color is not so bright.

What do you recommend for me to purchase for the SC430?
Will the product be easy to replace w/ the current OEM light?

I prefer the blue-color light.

thanks..Remy

if you have 1 map light then I guess you will only need 1 board.
Just write down you want blue in the note when you pay via paypal and I will follow your order

The light itself is simple as is.
High school kid will do the job without trouble.
As long as you know how to open the cover, you are good.

[ZSC3]

so how many units will i need to swap out all the lights on my SC? complete interior and rear license plate?

[Nigel-JDMParts]

Originally Posted by ZSC3

so how many units will i need to swap out all the lights on my SC? complete interior and rear license plate?

I am not sure how many light you have in your interior.

I assume one map light and one dome light (in the middle)

then you will need 2 led baords.

the board should not fit your rear licnese plate, except you have some honda, acura or you want to open up your housing and put it in.

The socket will fit, but the housing opening is too small for the board to get in.

[Scorny]

Sup,let me know if you ship to Ontario,Canada.I will like to take care of all my interior lights and the trunk with leds(white).
If you can tell me how many bulbs,the kind I need and price,that will be great.My car is a 94 LS400.

Thanks.