IS250 / IS350 Hyper Black Linea Corse Lemans Group buy
#77
I'll say it depends on your suspension set up. If you have a 350 with prokit, then 235/35F and 275/35R. Most people get either the Falken 452 or the Toyo T1R. I went with the Falken since it's "suppose" to adjust to the camber wear some what. If money is not an issue for you, I'll def. get the Bridgestone RE960AS. IMO, the road noise on the Falken is kind of loud comparing to Bridgestone RE960AS on my stockers.
#78
"check system" will stay on forever until you get the new sensor programmed. If you buy a new set of TMPS from the dealer, you'll still need to get it program, since your ECU only recognize the serial number from your original sensors. The only way to save yourself this money is to use your stock ones.
#79
I will be installing my wheels with Toyo T1R's next week. I have IS350 Prokit also. With stock wheels/tires, I see significantly less gap on rear wheels compared to the front and it is hard to visualize the rear gap end up being too much after the new setup. Is it because the rear tires are more stretched than the front? What about getting 285/30/19 vs. 275/35/19 instead of 275/30/19. Do you see any potential problems such as rubbing? Thanks.
#80
"check system" will stay on forever until you get the new sensor programmed. If you buy a new set of TMPS from the dealer, you'll still need to get it program, since your ECU only recognize the serial number from your original sensors. The only way to save yourself this money is to use your stock ones.
i was hopping the "check system" only comes in once in awhile....so i can still use the multi-function display somehow...
so even if i have 2 sets of sensors, 1 for my winter tire, 1 for the new LM rep, i will still need to get it program from the dealer once i mount the other set?
#81
wow, even if i don't install the sensor?
i was hopping the "check system" only comes in once in awhile....so i can still use the multi-function display somehow...
so even if i have 2 sets of sensors, 1 for my winter tire, 1 for the new LM rep, i will still need to get it program from the dealer once i mount the other set?
i was hopping the "check system" only comes in once in awhile....so i can still use the multi-function display somehow...
so even if i have 2 sets of sensors, 1 for my winter tire, 1 for the new LM rep, i will still need to get it program from the dealer once i mount the other set?
#82
Instructor
iTrader: (10)
first time trying to upload pictures, lets see if it works
[IMG]<a href="http://s535.photobucket.com/albums/ee352/is350****/?action=view¤t=11.jpg" target="_blank"><img src="http://i535.photobucket.com/albums/ee352/is350****/11.jpg" border="0" alt="Photobucket"></a>[/IMG]
[/IMG]
LOL FAIL!!! need a lil help
[IMG]<a href="http://s535.photobucket.com/albums/ee352/is350****/?action=view¤t=11.jpg" target="_blank"><img src="http://i535.photobucket.com/albums/ee352/is350****/11.jpg" border="0" alt="Photobucket"></a>[/IMG]
[/IMG]
LOL FAIL!!! need a lil help
Last edited by sr20mofo; 08-03-08 at 10:11 PM.
#85
Former Sponsor
Thread Starter
iTrader: (5)
Join Date: Jul 2007
Location: CA
Posts: 895
Likes: 0
Received 0 Likes
on
0 Posts
i think your links are getting ****'d out because of the swear filter.
email me your photobucket links
sales@wheeldude.com
email me your photobucket links
sales@wheeldude.com
#88
can anyone help me out?
i just tried to have the rims installed today, and was told that i should have some spacers to make them hub-centric, and also my stock lug nuts wont work with the new rims. what did you guys use to mount these rims?
i just tried to have the rims installed today, and was told that i should have some spacers to make them hub-centric, and also my stock lug nuts wont work with the new rims. what did you guys use to mount these rims?