New Product Front F Bushing offering and eye opening video inside.
#243
Tech Info Resource
iTrader: (2)
It didn't feel subtle to me at all, but I did both LCA bushings or maybe better said, all four at the same time. No flex front and no flex rear. Feels like a different car.
#246
Tech Info Resource
iTrader: (2)
Super solid, high maintenance.
#247
Pole Position
Just wanted to post an update after 10,000 miles on the new front tires. Perfectly even front tire wear!!! I'm thinking I could get close to 25-30,000 miles on the PSS's now!
Last edited by NSXGuy; 02-03-16 at 09:33 PM.
#248
#249
Pole Position
#250
Tech Info Resource
iTrader: (2)
I am running a little toe out and not seeing any of the issues I saw before I put the bushings in. Even wear across the tread after installing these.
#251
Thanks for the on going feedback on our product. Literally millions of miles on these bushings around the world. The progressive support of the poly profile is perfect for street and spirited grip vehicles alike and its a perfect fit for the IS-F.
We also just finished the bearing mounts for first customer ship for a more aggressive feedback. Nvh is still in check with our other bushings installed and no noise.
I will post up pics once we have them assembled in brackets.
We also just finished the bearing mounts for first customer ship for a more aggressive feedback. Nvh is still in check with our other bushings installed and no noise.
I will post up pics once we have them assembled in brackets.
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
#253
Our bearings are manufactured by FK, made in the USA 3-p precision bearing with PTFE liners.
Mike
Mike
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
#254
Thanks FIGS for helping me get rid of a squeak in < -10 degree weather.
I ended up taking the LCA bushings completely off and re-lubing the pieces.
So far tested in extreme cold weather with no noise (been now a couple of weeks).
Truthfully I would think it be very difficult to re-lube these while it is on the car. While the LCA Bushing was off I had to take a rubber mallet and socket with adequate force to push them out.
Used a socket and rubber mallet to push out the piece
I ended up taking the LCA bushings completely off and re-lubing the pieces.
So far tested in extreme cold weather with no noise (been now a couple of weeks).
Truthfully I would think it be very difficult to re-lube these while it is on the car. While the LCA Bushing was off I had to take a rubber mallet and socket with adequate force to push them out.
Used a socket and rubber mallet to push out the piece
#255
Thanks FIGS for helping me get rid of a squeak in < -10 degree weather.
I ended up taking the LCA bushings completely off and re-lubing the pieces.
So far tested in extreme cold weather with no noise (been now a couple of weeks).
Truthfully I would think it be very difficult to re-lube these while it is on the car. While the LCA Bushing was off I had to take a rubber mallet and socket with adequate force to push them out.
Used a socket and rubber mallet to push out the piece
I ended up taking the LCA bushings completely off and re-lubing the pieces.
So far tested in extreme cold weather with no noise (been now a couple of weeks).
Truthfully I would think it be very difficult to re-lube these while it is on the car. While the LCA Bushing was off I had to take a rubber mallet and socket with adequate force to push them out.
Used a socket and rubber mallet to push out the piece
Mike
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions