Kauro

Hey CL SoCal! I was wondering if anyone know a place to get my Front grill plate, Center console and Door trim wrapped in the 714 Area. Thanks!


Edit: Anyone know how much it will run me? for the center console and all 4 door window button area?

tommyGS3

iTrader: (4)

do it yourself...very easy..i did it my self...buy a few yards on ebay and 3m spray glue..

whitebeast

iTrader: (5)

what happen if you want to go back to stock?
Those glue not easy to get it off

whitebeast

iTrader: (5)

what happen if you want to go back to stock?
Those glue not easy to get it off

nGooo

iTrader: (1)

Take it to jlc lighting. They do led and vinyl wraps. I've seen there vinyl wrap and it's super legit. Check them out they are located in the 626. They are also one of the vendors here on CL.

Crzyxcrys

Yes jack is very good. Jlc lighting

Kauro

their address is 2115 Troy Ave., South El Monte, CA 91733 correct? Yelp has their address on Garvey.

SoCal Cyco

iTrader: (20)

http://destronsgarage.com/ he is super nice, local (714) and has quality products. its not vinyl but an actuall fabric, i know of a few people who have used it also with great success. fyi i just did mine but i bought another set of wood trim, for 2 reasons: mine was in perfect condition 2) if i wanna change it back its a not a probleml and i can sell the cf one later. ps. if you have tan interior it does not look nearly as good as black does.

nGooo

iTrader: (1)

Correct.




MSG length

Kauro

Anyone know how much it will run me? for the center console and all 4 door window button area?

I don't trust myself doing it, so i will have a professional do it

neomedic

iTrader: (5)

tagged...interested in knowing the price as well

ISF4life

iTrader: (30)

you can do it yourself, and if u want to go back to stock just spray goo gone and clean it, that it simple.

chrispy

iTrader: (21)

Contact Don Nguyen.

http://www.facebook.com/profile.php?id=100001497498618

He specializes in vinyl wraps for interior and exterior. He's wrapped a whole car in CF vinyl before

KillaIS250

iTrader: (1)

+1 on Don Nguyen, heard good things about his work.

But I still think you should do it yourself. It's easy to remove the center piece and the door pieces, and then wrapping it is not really that hard. Just take your time and be careful with it, and you can have it all done in a couple hours, for the cost of the materials only

genetic

iTrader: (1)

I've seen Don's work. Friends m3 needed some stuff done, great quality and he knows what he's doing