passnu2

iTrader: (33)

who has the tools to do this who would be kind enough to help me take off my springs and put the OEM back on this saturday or sunday??

OR if you have a 350 and want to do a swap let me know!

woaitsj3ff

I have a bunch of tools Mike, but I'm in Taiwan for the next 2 weeks. If I can be of any help to you when I come back let me know and I'll be happy to help you in any way.

getdowng

you can rent tools (spring compressors, etc.) from pep boys (i dont know about other stores) for free....

neurocity

iTrader: (17)

Lets do Saturday...Your place. I'll bring tools.
I have to drop off my wing at Steve (paint guy) shop.

I don't have a spring compressor...But I can get one.
You have a air compressor?

passnu2

iTrader: (33)

^^

Thank you! Brian and I got the rears done today. A little more work then I would have thought but I am going to get the XM out also with all the stuff out. Tomorrow the Side Mirrors come off then Saturday we can nock out the fronts. I swear I hope they are easier then the rears where.

I rented the tool for the auto store and they credit me the $$ when i take it back so that works out good. its better to get done at a shop for sure. they have better tools that are easier to use.

we can get your radar done also!

Mike

VikH

iTrader: (5)

I am free Sunday, so let me know if you need help Mike! It's gonna be weird seeing your car fully stock. When is the car going?

passnu2

iTrader: (33)

thanks Vik...will see if I cant be done before then funny it looks like the rear sits lower then it should? but its been so long and I am not positive. The fronts will put it back to OEM 4x4 status

the car looks perfectly level with the stock rears and the front Teins still on. I am going to see how it rides just out of curiosity tomorrow.

I hope to dump the car next week....

IceZ

Those Tein's dont fit an AWD right?

passnu2

iTrader: (33)

check your pm

Brian231

Man that was a lot of work and a sprained wrapped wrist to take from it (LOL), Ah, wouldn't miss it for the world.

oblivionis

iTrader: (2)

Did you have to disconnect the upper control arms to remove the springs?

passnu2

iTrader: (33)

on the fronts I will have to...its was how they removed them at the dealer when I had them installed. The fronts I think are easier to get in and out compared to the rears.

passnu2

iTrader: (33)

I do have a small compressor but not sure it will work for this?? cant hurt to try. I dont have tools for the car I had it for nail gun and the remodel of this place and it worked good for that....

hit me up and let me know if you can make it.

thanks
Mike

VikH

iTrader: (5)

Did you guys get em off? Post 4x4 pics with you offroading your IS!

passnu2

iTrader: (33)

Matt has some pics to post alright something is wrong with my car....lets see if anyone has advice on here after he post...

Positive things happened today

I got Matt's radar hardwired in his GS

I did a Navi Hack on a 2IS from WI

and we put all the springs on my carwhat a busy day! but something went really wrong with my IS

pics to follow once Matt gets around to it...Matt will fill in on who to point the finger at