trying to get in contact with the lextreme guys
#1
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
trying to get in contact with the lextreme guys
hi all, trying to get hold of the lextreme guys..
anyone know em?
anyone know em?
#2
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
54 views and no info to help...
ive joined the forum there but no activation e-mail..
surely someone should know them or help
ive joined the forum there but no activation e-mail..
surely someone should know them or help
#5
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the responce..
Basically I'm building a patch loom for a stand alone ecu for 1uz LS400 and celsiour..
Once I've sorted that I would expand to other Toyota models of the same ecu plugs.
The ecu is the haltech elite.
This will control both motor and gearbox.. and the addition of the flex fuel sensor so it will run on any fuel without changing tune etc..
Fixing my car first then produce a saleable item for non vvti 1uz. Then expand it to vvti models if I get enough interest.
Problem is I've only got 1 style of ecu plug I can use atm.. and it's not the style my car has being a 1993 model.
So wanted to know off them if they knew any suppliers of the actual ecu plugs.
Plus any additional ecu pinout diagrams besides what that have on there site..
Basically I'm building a patch loom for a stand alone ecu for 1uz LS400 and celsiour..
Once I've sorted that I would expand to other Toyota models of the same ecu plugs.
The ecu is the haltech elite.
This will control both motor and gearbox.. and the addition of the flex fuel sensor so it will run on any fuel without changing tune etc..
Fixing my car first then produce a saleable item for non vvti 1uz. Then expand it to vvti models if I get enough interest.
Problem is I've only got 1 style of ecu plug I can use atm.. and it's not the style my car has being a 1993 model.
So wanted to know off them if they knew any suppliers of the actual ecu plugs.
Plus any additional ecu pinout diagrams besides what that have on there site..
#6
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
so what i need is the actual ecu plug not the engine harness plug.
but in this config
but in this config
#7
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
actually seriously considering buying a 3d printer and creating my own..
Trending Topics
#8
There is a guy around here who is an ECU engineer (i think that was his job?) only a matter of time before he comes in. Im sure he knows where to get them lol
And since mine is a '93 as well, and I spit raw fuel when I bounce off the rev limiter, I need this to get done lol
And since mine is a '93 as well, and I spit raw fuel when I bounce off the rev limiter, I need this to get done lol
#9
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Thanks mate..
Thread
Thread Starter
Forum
Replies
Last Post