Lexus LC News
#1126
Lexus Fanatic
iTrader: (20)
and even without aero, if the side profile were anything like this, the front wheel suspension travel would be about half an inch - so don't bother going over speed bumps or well, any bumps as it will loosen fillings although a benefit will be breaking up kidney stones.
#1128
funny to see so much excitement about a car that's not available appearing in a video game that's not yet available.
and even without aero, if the side profile were anything like this, the front wheel suspension travel would be about half an inch - so don't bother going over speed bumps or well, any bumps as it will loosen fillings although a benefit will be breaking up kidney stones.
and even without aero, if the side profile were anything like this, the front wheel suspension travel would be about half an inch - so don't bother going over speed bumps or well, any bumps as it will loosen fillings although a benefit will be breaking up kidney stones.
#1129
Lexus Fanatic
iTrader: (20)
#1130
These renders have shown up from Japanese magazines (not particularly skillful though). States it is due in November 2016, unlike previous 2017 reports. Considering how long ago the LC was likely signed-off, I believe we should've seen something by now. It seems these Japanese sources get info, but most people never find it quickly enough.
#1131
Super Moderator
I hope the real production car will look a lot better than these renderings, these renderings are less attractive than even the RC F, which I like a lot btw, but I expect a lot more for the LC.
They should just make the production LC as close to the concept as possible, remember, the concept car got rave responses almost universally ......
They should just make the production LC as close to the concept as possible, remember, the concept car got rave responses almost universally ......
#1132
Lexus Fanatic
#1134
I hope the real production car will look a lot better than these renderings, these renderings are less attractive than even the RC F, which I like a lot btw, but I expect a lot more for the LC.
They should just make the production LC as close to the concept as possible, remember, the concept car got rave responses almost universally ......
They should just make the production LC as close to the concept as possible, remember, the concept car got rave responses almost universally ......
#1136
Lexus MUST evolve their design language for flagship models to a point, so they can make a specific statement for the upper end and set a newer tone for Lexus design. It isn't ideal for subordinate models to be the setting the tone for technology and design in a luxury model range.
I understand that the LC had to wait for the 5LS platform and requires a great deal of development work behind it as well. The secondary LS facelift already adopted the Spindle Grille to be in line with current models. The next LS and the 4RX are the first successors to replace existing Spindle Grille models. Fancier headlights with a bigger grille is not going be ideal nor is delivering something that looks exactly the same 5 years later, then falls behind lesser Lexus siblings with newer brand cues.
The top-down approach is best in that regard. Look at how the 2013 Avalon was fresh and influenced the 2014 Corolla and 2015 Camry facelift. I'm not saying entirely do away with the Spindle Grille, but moderately revolutionize styling to a point that other future Lexus models can trace their cues back to the flagships.
Uyetthoven stated many months ago that the frozen design of the MY2017 LC is 90% similar to the 2011 LF-LC design, so hopefully that means it has been further modernised as well and not just merely productionised. Even the 2012 LFA took a different trajectory in 2008 from the '07 Concept, due to various delays possibly outdating the original LFA production design aesthetically.
For that matter, does anyone think that Edward Lee (exterior designer of the LF-LC Concept) also got to work on the production model? It possible that he did and went back to Nagoya to help finish it up, meaning that Calty could've been responsible for it overall. Or did a subsequent internal design competition instead award the production proposal (pre-freeze) by another designer from ED2 or Nagoya HQ?
Unfortunately, if someone does not transfer to another department at a company, their work is assigned to someone else. If that happened, hopefully it was done under Edward Lee's supervision anyway.
I understand that the LC had to wait for the 5LS platform and requires a great deal of development work behind it as well. The secondary LS facelift already adopted the Spindle Grille to be in line with current models. The next LS and the 4RX are the first successors to replace existing Spindle Grille models. Fancier headlights with a bigger grille is not going be ideal nor is delivering something that looks exactly the same 5 years later, then falls behind lesser Lexus siblings with newer brand cues.
The top-down approach is best in that regard. Look at how the 2013 Avalon was fresh and influenced the 2014 Corolla and 2015 Camry facelift. I'm not saying entirely do away with the Spindle Grille, but moderately revolutionize styling to a point that other future Lexus models can trace their cues back to the flagships.
Uyetthoven stated many months ago that the frozen design of the MY2017 LC is 90% similar to the 2011 LF-LC design, so hopefully that means it has been further modernised as well and not just merely productionised. Even the 2012 LFA took a different trajectory in 2008 from the '07 Concept, due to various delays possibly outdating the original LFA production design aesthetically.
For that matter, does anyone think that Edward Lee (exterior designer of the LF-LC Concept) also got to work on the production model? It possible that he did and went back to Nagoya to help finish it up, meaning that Calty could've been responsible for it overall. Or did a subsequent internal design competition instead award the production proposal (pre-freeze) by another designer from ED2 or Nagoya HQ?
Unfortunately, if someone does not transfer to another department at a company, their work is assigned to someone else. If that happened, hopefully it was done under Edward Lee's supervision anyway.
#1138
Lexus MUST evolve their design language for flagship models to a point, so they can make a specific statement for the upper end and set a newer tone for Lexus design. It isn't ideal for subordinate models to be the setting the tone for technology and design in a luxury model range.
I understand that the LC had to wait for the 5LS platform and requires a great deal of development work behind it as well. The secondary LS facelift already adopted the Spindle Grille to be in line with current models. The next LS and the 4RX are the first successors to replace existing Spindle Grille models. Fancier headlights with a bigger grille is not going be ideal nor is delivering something that looks exactly the same 5 years later, then falls behind lesser Lexus siblings with newer brand cues.
The top-down approach is best in that regard. Look at how the 2013 Avalon was fresh and influenced the 2014 Corolla and 2015 Camry facelift. I'm not saying entirely do away with the Spindle Grille, but moderately revolutionize styling to a point that other future Lexus models can trace their cues back to the flagships.
I understand that the LC had to wait for the 5LS platform and requires a great deal of development work behind it as well. The secondary LS facelift already adopted the Spindle Grille to be in line with current models. The next LS and the 4RX are the first successors to replace existing Spindle Grille models. Fancier headlights with a bigger grille is not going be ideal nor is delivering something that looks exactly the same 5 years later, then falls behind lesser Lexus siblings with newer brand cues.
The top-down approach is best in that regard. Look at how the 2013 Avalon was fresh and influenced the 2014 Corolla and 2015 Camry facelift. I'm not saying entirely do away with the Spindle Grille, but moderately revolutionize styling to a point that other future Lexus models can trace their cues back to the flagships.
When the C-Class came out after the S-Class everyone says "Wooow.. a baby S-Class. I want one!", but when the A8 came out after the A4 of the same generation everyone was like "yawn.. looks just like a bigger A4". The order matters.
#1140
Lexus MUST evolve their design language for flagship models to a point, so they can make a specific statement for the upper end and set a newer tone for Lexus design. It isn't ideal for subordinate models to be the setting the tone for technology and design in a luxury model range.
I understand that the LC had to wait for the 5LS platform and requires a great deal of development work behind it as well. The secondary LS facelift already adopted the Spindle Grille to be in line with current models. The next LS and the 4RX are the first successors to replace existing Spindle Grille models. Fancier headlights with a bigger grille is not going be ideal nor is delivering something that looks exactly the same 5 years later, then falls behind lesser Lexus siblings with newer brand cues.
The top-down approach is best in that regard. Look at how the 2013 Avalon was fresh and influenced the 2014 Corolla and 2015 Camry facelift. I'm not saying entirely do away with the Spindle Grille, but moderately revolutionize styling to a point that other future Lexus models can trace their cues back to the flagships.
Uyetthoven stated many months ago that the frozen design of the MY2017 LC is 90% similar to the 2011 LF-LC design, so hopefully that means it has been further modernised as well and not just merely productionised. Even the 2012 LFA took a different trajectory in 2008 from the '07 Concept, due to various delays possibly outdating the original LFA production design aesthetically.
For that matter, does anyone think that Edward Lee (exterior designer of the LF-LC Concept) also got to work on the production model? It possible that he did and went back to Nagoya to help finish it up, meaning that Calty could've been responsible for it overall. Or did a subsequent internal design competition instead award the production proposal (pre-freeze) by another designer from ED2 or Nagoya HQ?
Unfortunately, if someone does not transfer to another department at a company, their work is assigned to someone else. If that happened, hopefully it was done under Edward Lee's supervision anyway.
I understand that the LC had to wait for the 5LS platform and requires a great deal of development work behind it as well. The secondary LS facelift already adopted the Spindle Grille to be in line with current models. The next LS and the 4RX are the first successors to replace existing Spindle Grille models. Fancier headlights with a bigger grille is not going be ideal nor is delivering something that looks exactly the same 5 years later, then falls behind lesser Lexus siblings with newer brand cues.
The top-down approach is best in that regard. Look at how the 2013 Avalon was fresh and influenced the 2014 Corolla and 2015 Camry facelift. I'm not saying entirely do away with the Spindle Grille, but moderately revolutionize styling to a point that other future Lexus models can trace their cues back to the flagships.
Uyetthoven stated many months ago that the frozen design of the MY2017 LC is 90% similar to the 2011 LF-LC design, so hopefully that means it has been further modernised as well and not just merely productionised. Even the 2012 LFA took a different trajectory in 2008 from the '07 Concept, due to various delays possibly outdating the original LFA production design aesthetically.
For that matter, does anyone think that Edward Lee (exterior designer of the LF-LC Concept) also got to work on the production model? It possible that he did and went back to Nagoya to help finish it up, meaning that Calty could've been responsible for it overall. Or did a subsequent internal design competition instead award the production proposal (pre-freeze) by another designer from ED2 or Nagoya HQ?
Unfortunately, if someone does not transfer to another department at a company, their work is assigned to someone else. If that happened, hopefully it was done under Edward Lee's supervision anyway.
The thing is that the more recent product of the same generation will always be fresher and have something newer. Look at the 7 Series, it does not feel outdated compared to the rest of the range, because the rest just did not advance. Look at Mercedes, the new GLE just does not feel fresh, because the A and C Class are so much more advanced.
Finally, what it more important is not the direction of the development stream, but that the top range product should be as timeless as possible. Current LS does that very well. Give it equally powerful V8 Turbo as the competitors, and I'd take it over any German luxury sedan.