Project car?
#1
Lexus Champion
Thread Starter
Project car?
Hey CL, my and my father are looking for a good project car. However, we are fairly new to all of this and need some suggestions. We want it to be an import and we want it to be able to handle some power. In that case I was thinking either a Supra or Nissan 240 or 300. Please, if you have any suggestions please throw them out. Or any links would be helpful too!
Thanks,
Elliott
Thanks,
Elliott
#4
Tech Info Resource
iTrader: (2)
Add a turbo, or rebuild an already turbo'ed engine?
Rebuilding a 2JZ-GTE isn't economical unless you plan on more than about 800 whp. You can get a complete short block from Toyco for $2100, and it's easily good to 800 whp with no additional effort required. You'd be hard pressed to buy the parts and get the machine work done even if you owned a short block already for that price. I actually have this dilemna sitting in my garage - dead GTE short block, needs thrust washers and rebuild...almost not worth it.
Rebuilding a 2JZ-GTE isn't economical unless you plan on more than about 800 whp. You can get a complete short block from Toyco for $2100, and it's easily good to 800 whp with no additional effort required. You'd be hard pressed to buy the parts and get the machine work done even if you owned a short block already for that price. I actually have this dilemna sitting in my garage - dead GTE short block, needs thrust washers and rebuild...almost not worth it.
#7
BahHumBug
iTrader: (10)
300zx is a PITA to work on since engine space is so tight. no love for the RX7? very mod friendly and they like rebuilds (apex seals )
a 240 is a good choice but it depends onthe motor since SR20 parts are rare and expensive (oem and aftermarket, but its growing) and KA motors cheaper but arent as "mod friendly"
and SW20 is also a good choice even tho it is a little cramped, the 3S-GTE motor has TONS of parts available at reasonable prices int he US.
a 240 is a good choice but it depends onthe motor since SR20 parts are rare and expensive (oem and aftermarket, but its growing) and KA motors cheaper but arent as "mod friendly"
and SW20 is also a good choice even tho it is a little cramped, the 3S-GTE motor has TONS of parts available at reasonable prices int he US.
Trending Topics
#8
300zx is a PITA to work on since engine space is so tight. no love for the RX7? very mod friendly and they like rebuilds (apex seals )
a 240 is a good choice but it depends onthe motor since SR20 parts are rare and expensive (oem and aftermarket, but its growing) and KA motors cheaper but arent as "mod friendly"
and SW20 is also a good choice even tho it is a little cramped, the 3S-GTE motor has TONS of parts available at reasonable prices int he US.
a 240 is a good choice but it depends onthe motor since SR20 parts are rare and expensive (oem and aftermarket, but its growing) and KA motors cheaper but arent as "mod friendly"
and SW20 is also a good choice even tho it is a little cramped, the 3S-GTE motor has TONS of parts available at reasonable prices int he US.
#9
FD's with LS1's are deadly quick, mid 11's startin'.
So just a rebuild and a turbo?
Eh, a S14 conversion with a 2JZ-GTE driveline would be pretty damn pimp if you could pull it off. Dunno if you could stuff it in there though, not all that familiar with the dimensions.
So just a rebuild and a turbo?
Eh, a S14 conversion with a 2JZ-GTE driveline would be pretty damn pimp if you could pull it off. Dunno if you could stuff it in there though, not all that familiar with the dimensions.
#11
Lexus Champion
Thread Starter
Wow this is so confusing..I don't really like the RX7, I like the MR2 and the 240...Now I just need to figure out what to do with them..
Edit: Just saw that corolla and I don't like it too much.
Edit: Just saw that corolla and I don't like it too much.