When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These came in 2 weeks ago but I never had the chance to post a picture. I'll put these in once my car is painted black. It will be one of the finishing touches
My rear light out indicator is lit up but my tail lights are working fine. Anyone know the solution to this?
The tail light out indicator get triggered when you put in LEDs because they draw less current than halogens. You'll either need to get load resistors or you can pull the bulb in your dash
The tail light out indicator get triggered when you put in LEDs because they draw less current than halogens. You'll either need to get load resistors or you can pull the bulb in your dash
Looks like I have another problem with the tail lights... 3 of the LED's aren't working at times. Any solutions?
Also, my key can only unlock the car but it can't lock it using the remote. My car battery died while I was on deployment so I'm assuming this might be the case and I might have to reset something?
I’ve been MIA for a bit due to finding time to get parts installed. So far I got my control arms and toe arm installed. Got it aligned and got my headlights retro fitted. I also had to get a used fender from the junkyard due to the stock one being damaged. Now I’m waiting to paint this car. Don’t know what else I left out but here are a few pictures.
Does anyone know if this would fit my JP front bumper? I'm just concerned the horizontal part of the bumper is too deep and my plate would hit the lip.
03-27-17, 08:53 PM
