Gerxiong89 ultrasonic blue mica build
03-12-17, 09:34 AM
#121
Pole Position
Thread Starter
glad to hear about the diffuser, I purchased it but haven't had the time to get it put on.
as you said fitment looks real good on yours.
was hesitant due to the fact they supposedly sent one guy an entirely different diffuser. who knows though...
look forward to getting mine installed.
nice looking ride
as you said fitment looks real good on yours.
was hesitant due to the fact they supposedly sent one guy an entirely different diffuser. who knows though...
look forward to getting mine installed.
nice looking ride
03-17-17, 07:29 AM
#123
03-17-17, 08:27 AM
#124
Pole Position
Thread Starter
if you need help. Lmk. When you removed the rear reflector light on the bottom (secured by a screw onto bumper) do not reuse that same hole to screw the reflector onto the cf diffuser. Instead, you need to put pressure on the diffuser til it sits flush, then you use self taping screw and screw it onto the diffuser around the aera where the reflector sits. Also put the middle section on first, i used zip ties for the middle section and screws on the side. Use dum dum(windscreen tape) to secured the reflector back on. I still need to go help out a buddy put his on too lol.
The following users liked this post:
slickster9 (03-30-17)
03-25-17, 03:53 PM
#131
Lexus Test Driver
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,732 Likes
on
1,368 Posts
Dang! Just dang!
03-26-17, 07:56 AM
#133
03-26-17, 12:36 PM
#134
Pole Position
Thread Starter
03-27-17, 09:45 AM
#135