When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Splitter is on eBay. And o can't disclose price I paid for fenders and skirts due to I know the owner of Lexus dealership by me so I paid a very very low price
How long did it take to install? I assume these guys do installs as well?
They do installs. But I did everything on my own. Very easy just gotta know what ur doing with suspension and wiring. Took me about 6 hours from start to finish with management running lines inside the car and putting bags on
How did you install your skipper lip and artisan roof spoiler? double sided tape will do? I have the skipper lip, but the holes that are on it don't match up with the bumper, so I'm assuming bumper drilling is necessary?
How did you install your skipper lip and artisan roof spoiler? double sided tape will do? I have the skipper lip, but the holes that are on it don't match up with the bumper, so I'm assuming bumper drilling is necessary?
Skipper lip bolts right up with factory holes for me. And aristan spoiler double sided tape
Is your rear sway bar bolted into the stock location or do you have relocation brackets? My bags only have about .5" on each side of the control arm so you can't bolt the rear sway bar back on. I'm running UAS rears.
Is your rear sway bar bolted into the stock location or do you have relocation brackets? My bags only have about .5" on each side of the control arm so you can't bolt the rear sway bar back on. I'm running UAS rears.
Ahh man. That's why I never Went with other air ride brands due to u had to remove set bar in rear. With Airtekk no need to modify or remove rear sways. How do u like the UAS kit? I didn't hear to much good things about them. U should contact Airtekk ask for Denny buy a rear set from him
07-17-16, 03:34 PM
