Rcreegan

iTrader: (2)

Hey guys im currently building a 95 sc300 that I picked up from a old member on here. The car is pretty clean but has its flaws here and there. Doing a 1jzgte non vvti swap and keeping it automatic. I will post pictures as I go and you can see the progress of the car.

Recent things that I have done

pulled motor and parted most of the stock stuff.

Installed new oil pump, water pump, valve stem seals , valve cover gaskets , plugs, powder coated everything that would fit in the oven lol

cxracing thick wall manifold and tial 44 wastegate

set the timing and that jazz

here are the pictures

Killianjt

Hope to get help. Changed the water pump and timing belt on 95 sc300. Was careful to not lose the timing by marking the cam position as well as the crank. Runs great when cold but after warm won't run good at all. Adjusted the distributor, runs best all the way to the left ( down ). What to do? Can I remove and testable the distributor? Also I read in a post I need to jump two positions on diagnostic plug??? Please explain Jump to what?

GISguy

Photos aren't showing up :\ Also, sorry about any missing bolts/brackets from the 1J's IM.

Rcreegan

iTrader: (2)

here are some photos guyssss.....



New radiator due to age and the oem falling apart..





thick wall manifold t4 for some boost





scooped a mk4 supra hks exhaust





bought a wire harness on facebook that was supposed to be complete... ended up re doing the entire harness ... twisted wires with electric tape ....





adding 440's from a aristo I had laying around





cleaning the bay out





towing the sled home





can you say some solid phr mounts?





cleaning for some fresh powww powww





new valve seals installed.... I dunno what I would have done without this tool





dirty covers pre media blasting





motor how I picked it up from GIS GUy





she chilling!





coated parts





motor and front





turbo goodies

Rcreegan

iTrader: (2)

looking for a bunch of 1jzgte intake manifold sensors or complete manifold.. pm or text me with what you have for sale 804-536-3879

tjmhillz

iTrader: (6)

Looking good.. Cant wait to finish my 1j swap.. still waiting on some parts to come in haha. Im hoping to have my car done by springfest in VA beach.

Rcreegan

iTrader: (2)

@tjmhillz yeah im hoping to have my car done by then as well... We can meet up !

Rcreegan

iTrader: (2)

so what throttle cable am i supposed to use? i saw you can use the 94 camry one and a supra. i want to keep the trans pressure line in the same place so what all do i need to do...?

tjmhillz

iTrader: (6)

So hows the build coming along?