Novel RCF Build thread - Molten Pearl w/ Perf. Pkg/TVD
#17
I wish I had more time to do dyno runs with all the different mods separately. I'll definitely dyno it once the Novel exhaust is installed to go with my headers. This way, you guys can know how much power the Novel performance packages actually makes.
Thanks for those kind words! Thank you for sourcing the parts for me!
Thanks!
Thanks! I haven't personally dynoed the car yet. The intake assembly is stock, but I have an AFE drop in filter.
Tanabe dynod my car when they put the axle back on and gains were about 5rwhp and 10-11 lbs of torque. I have not dynoed with the headers yet.
Awesome thread! I can't wait to see more updates!!
The OP is one of the nicest most genuine guys you'll meet. If you ever have a chance to meet him and talk to him in person, you can get a sense very quickly of what kind of person he is.
On top of that, his NOVEL RCF build is going to be epic!! Thank you for your support! We cannot wait to see the build put together soon.
The OP is one of the nicest most genuine guys you'll meet. If you ever have a chance to meet him and talk to him in person, you can get a sense very quickly of what kind of person he is.
On top of that, his NOVEL RCF build is going to be epic!! Thank you for your support! We cannot wait to see the build put together soon.
Thanks!
Tanabe dynod my car when they put the axle back on and gains were about 5rwhp and 10-11 lbs of torque. I have not dynoed with the headers yet.
#20
[QUOTE=toystry;9202058]Wait what? $13,000 for headers and an exhaust? Seriously? How in the hell is that even possible? I'm not cheap when it comes to aftermarket parts but you can buy a car for $13,000. Headers and exhaust will net what, 60hp max? Lets say you get 60hp from the combo, that's $217 per hp.
On a separate note, that ORANGE is beautiful.....I'd love to see one in person.[/QUOTE
In order for him to get full 60hp he will need to be full catless, that's Novel headers with No secondary cats with full exhaust. Love Novel exhaust system.
On a separate note, that ORANGE is beautiful.....I'd love to see one in person.[/QUOTE
In order for him to get full 60hp he will need to be full catless, that's Novel headers with No secondary cats with full exhaust. Love Novel exhaust system.
#23
After inspecting a set of Novel headers I have to ask you this......what the heck is up with them cutting out part of the tubes and welding in sheet metal?!?? Apparently they did this to make them fit correctly. I'd be PISSED if I spent that kinda cash and they take a short cut in the production sets. I hope yours didn't get cut up like the set I saw.
#24
After inspecting a set of Novel headers I have to ask you this......what the heck is up with them cutting out part of the tubes and welding in sheet metal?!?? Apparently they did this to make them fit correctly. I'd be PISSED if I spent that kinda cash and they take a short cut in the production sets. I hope yours didn't get cut up like the set I saw.
Since my car was the first LHD order for the headers, unfortunately, it had come in pieces. This is because they weren't sure how it would fit the LHD models. So I assume they put them in pieces so the installing shop can adjust them accordingly, and once they have it adjusted, they would tack weld it so it stays in place.
Did the Novel ISF headers come in 1 piece or multi-piece?
#25
Former Sponsor
We did notice that there was very little clearance between the headers and the engine. There isn't much room in there to begin with since the Lexus V8 is rather large. For the install, we did have to lift the engine from one side to the other to fit the headers in properly. There just isn't any room to maneuver around to install them.
Like the OP said, this is the very first US model Left Hand Drive header from NOVEL for the RCF so we did have to spend time aligning the piping before finishing the install.
Once installed, there was a DRASTIC difference in sound and we noticed some performance improvements in the mid-range power band.
After inspecting a set of Novel headers I have to ask you this......what the heck is up with them cutting out part of the tubes and welding in sheet metal?!?? Apparently they did this to make them fit correctly. I'd be PISSED if I spent that kinda cash and they take a short cut in the production sets. I hope yours didn't get cut up like the set I saw.
#27
Lexus Test Driver
iTrader: (2)
Join Date: Mar 2011
Location: Alberta
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
The install went well. After taking a look at the headers, we have to say the quality of the headers was awesome. The engineering and design layout of the piping was impressive.
We did notice that there was very little clearance between the headers and the engine. There isn't much room in there to begin with since the Lexus V8 is rather large. For the install, we did have to lift the engine from one side to the other to fit the headers in properly. There just isn't any room to maneuver around to install them.
Once installed, there was a DRASTIC difference in sound and we noticed some performance improvements in the mid-range power band.
We did notice that there was very little clearance between the headers and the engine. There isn't much room in there to begin with since the Lexus V8 is rather large. For the install, we did have to lift the engine from one side to the other to fit the headers in properly. There just isn't any room to maneuver around to install them.
Once installed, there was a DRASTIC difference in sound and we noticed some performance improvements in the mid-range power band.
Good job BP, but that does sound like a bit of a nightmare.
#28
Former Sponsor
The OP had a pretty clear vision in his head of what he wanted and executed his plans well. We're only here to help facilitate his vision and help guide him when he has questions. It's really turning out to be an impressive car.
#29
Former Sponsor
Thanks for the kind words as well!
#30
Hey guys, here is an update with pics - Kit installed, exhaust installed. I'm sorry, but video will have to come later, I mean a month later. I'm very busy, I will be in Taiwan and Japan for rest of November after SEMA.
I will post videos/sound clips later on soon as I get back from my Asia trip. I will also get it dynod ASAP once I'm back! I know you guys are waiting for that, I just don't have time right now. I wonder if BP Auto has videos/sound clips, if so, please post up since I won't be able to for a while. If not, I'll eventually get to it once I'm back. Thanks again!!
Hope you guys like it!
I will post videos/sound clips later on soon as I get back from my Asia trip. I will also get it dynod ASAP once I'm back! I know you guys are waiting for that, I just don't have time right now. I wonder if BP Auto has videos/sound clips, if so, please post up since I won't be able to for a while. If not, I'll eventually get to it once I'm back. Thanks again!!
Hope you guys like it!