93 sc400 2jzgte vvti aristo swap
#32
Rookie
Thread Starter
Join Date: Feb 2014
Location: florida
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Also this is the 1998 2jzgte vvti from aristo can you tell me if this is the fuel feed or return
This is the line above the oil filter going to the front of fuel rail
And this is the line on the side of the block going to the back of the fuel rail ... My guess this is the return?
This is the line above the oil filter going to the front of fuel rail
And this is the line on the side of the block going to the back of the fuel rail ... My guess this is the return?
#37
Rookie
Thread Starter
Join Date: Feb 2014
Location: florida
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody know what heater core lines go to where on block... The block has a hose right on the back of it behind the spark plugs does it go to this open line on the right in this photo
And the other line on the left is connected to the heater valve control unit I forget what they call it.. Not sure whe that goes on the block as well and not sure if I still need to use the heater control valve or not
And the other line on the left is connected to the heater valve control unit I forget what they call it.. Not sure whe that goes on the block as well and not sure if I still need to use the heater control valve or not
#38
Super Moderator
iTrader: (34)
you need to use the heater control valve if you want a good cold AC other wise hot coolant will always flow into your heater core .
the hose on the right goes to the side of the engine block and the hose on top of that heater valve goes on top of the black behind the last coil / plug .
the hose on the right goes to the side of the engine block and the hose on top of that heater valve goes on top of the black behind the last coil / plug .
#41
Rookie
Thread Starter
Join Date: Feb 2014
Location: florida
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
I'm using stock ecu for now until taxes then going to get the aem v2 and single turbo and new intake and get rid of the drive by wire
Here's the hoses I was talking about on the block
Here's the one heater line and you say it goes to the heater control valve cool beans that one out of the way
And this one goes to the one line next to heater control valve?
And then I got this hose looks like a vacuum hose on the rail that goes around the block . What is this for and where would it go?
Here's the hoses I was talking about on the block
Here's the one heater line and you say it goes to the heater control valve cool beans that one out of the way
And this one goes to the one line next to heater control valve?
And then I got this hose looks like a vacuum hose on the rail that goes around the block . What is this for and where would it go?