Build Threads Details on Club Lexus SC owner vehicles

97-SC300 Single Turbo Build Thread

Thread Tools
 
Search this Thread
 
Old 04-03-16, 03:00 PM
  #241  
97-SC300
Lexus Fanatic
Thread Starter
iTrader: (17)
 
97-SC300's Avatar
 
Join Date: Jun 2006
Location: Earth
Posts: 9,238
Received 131 Likes on 109 Posts
Default

Installed the ETS 5" intercooler that we bought last year. 3" piping on the hot side, 4" piping on the cold side. Ended up re-using the same bracket that we made for my last intercooler setup since it was already fit perfectly and painted. Only had to drill 2 holes in a different spot this time and add spacers because this one will sit a bit higher than the last one. Spacers were cut out of a temporary aluminum piping just to get the dimensions right, will be replaced with thicker metal pieces this upcoming week, but came out very nice and solid.


Name:  DSC_0793_zpspya0iljo.jpg
Views: 693
Size:  127.2 KB
Name:  DSC_0783_zpsmusf0rm0.jpg
Views: 722
Size:  304.6 KB
Name:  DSC_0784_zpswitvnozl.jpg
Views: 736
Size:  312.9 KB
Name:  DSC_0785_zpsxdrnubb9.jpg
Views: 695
Size:  319.1 KB
Name:  DSC_0786_zpsbbbkflgq.jpg
Views: 689
Size:  289.5 KB
Old 04-03-16, 03:03 PM
  #242  
97-SC300
Lexus Fanatic
Thread Starter
iTrader: (17)
 
97-SC300's Avatar
 
Join Date: Jun 2006
Location: Earth
Posts: 9,238
Received 131 Likes on 109 Posts
Default

Name:  DSC_0787_zpsama7zajy.jpg
Views: 713
Size:  264.1 KB
Name:  DSC_0789_zpsqe0eaxrn.jpg
Views: 678
Size:  269.0 KB
Name:  DSC_0788_zpsxnv68axn.jpg
Views: 703
Size:  260.0 KB
Name:  DSC_0790_zpstubjtbhs.jpg
Views: 656
Size:  270.0 KB
Name:  DSC_0791_zpsbyayygng.jpg
Views: 690
Size:  207.7 KB
Name:  DSC_0792_zpswgehuvt7.jpg
Views: 686
Size:  194.3 KB
Name:  DSC_0795_zpsgqadadfi.jpg
Views: 673
Size:  195.3 KB
Name:  DSC_0794_zpspedoyx4t.jpg
Views: 667
Size:  232.7 KB
Old 04-30-16, 05:09 PM
  #243  
jimmymac30
Advanced
iTrader: (8)
 
jimmymac30's Avatar
 
Join Date: Sep 2011
Location: Illinois
Posts: 535
Received 64 Likes on 49 Posts
Default

looking good! can't wait to see it completed!
Old 05-07-16, 09:37 AM
  #244  
hknubsauce
Lead Lap
iTrader: (2)
 
hknubsauce's Avatar
 
Join Date: Oct 2006
Location: CA
Posts: 500
Likes: 0
Received 0 Likes on 0 Posts
Default

My absolute favorite build...great attention to detail
Old 05-09-16, 10:23 AM
  #245  
czar07
Lead Lap
 
czar07's Avatar
 
Join Date: Dec 2009
Location: Western Australia
Posts: 550
Likes: 0
Received 1 Like on 1 Post
Default

Amazing attention to detail, as always. The best SC/Soarer I have ever seen! Keep the awesome work going!

What did you use to paint the modified shifter surround?
Old 05-15-16, 11:47 AM
  #246  
MrCJ305
Lead Lap
 
MrCJ305's Avatar
 
Join Date: Jan 2012
Location: FL
Posts: 766
Likes: 0
Received 0 Likes on 0 Posts
Default

Looking good...I'm following the build
Old 05-22-16, 03:08 PM
  #247  
97-SC300
Lexus Fanatic
Thread Starter
iTrader: (17)
 
97-SC300's Avatar
 
Join Date: Jun 2006
Location: Earth
Posts: 9,238
Received 131 Likes on 109 Posts
Default

Thanks guys.
Old 05-23-16, 07:59 PM
  #248  
SC400TT
Lexus Champion
iTrader: (4)
 
SC400TT's Avatar
 
Join Date: Mar 2003
Location: Florida
Posts: 3,395
Likes: 0
Received 8 Likes on 8 Posts
Default

Just went through your whole build thread...Awesomeness!! Great attention to detail, and CLEAN. I love how you meticulously went through all components and but this car correctly!! Your a rare breed my fellow Lexus Brotha!!

SC400TT
Old 05-25-16, 05:24 AM
  #249  
97-SC300
Lexus Fanatic
Thread Starter
iTrader: (17)
 
97-SC300's Avatar
 
Join Date: Jun 2006
Location: Earth
Posts: 9,238
Received 131 Likes on 109 Posts
Default

UPDATE:

Car is pretty much all one. fluids filled, fuel system primed. I am having an issue with the PROEFI and connecting to my laptop with the CAM communication cable. have to go through some of the wiring to see why it is not communicating. Hope to figure it out soon to do a first start up.


free photo hosting


adult photo sharing


image hosting
Old 05-25-16, 09:48 AM
  #250  
CatManD3W
Pole Position
iTrader: (18)
 
CatManD3W's Avatar
 
Join Date: May 2013
Location: Pittsburgh, PA
Posts: 2,207
Received 25 Likes on 17 Posts
Default

It might be your cable you are using man...I had similar issues when I hooked up the mapecu2...

Not sure what version of windows is needed for the proefi....but i know the mapecu needed to used windows xp
Old 05-25-16, 10:12 AM
  #251  
97-SC300
Lexus Fanatic
Thread Starter
iTrader: (17)
 
97-SC300's Avatar
 
Join Date: Jun 2006
Location: Earth
Posts: 9,238
Received 131 Likes on 109 Posts
Default

i am using the correct cable and operating system so i have no clue
Old 05-25-16, 11:28 AM
  #252  
motorheaddown
Lead Lap
 
motorheaddown's Avatar
 
Join Date: Aug 2002
Location: Florida
Posts: 714
Likes: 0
Received 13 Likes on 6 Posts
Default

Pull the ecu out of the car and apply power/ground, only; then, try to connect. If it works, then there's likely an issue with a harness ground.

-scott
Old 05-25-16, 07:08 PM
  #253  
97-SC300
Lexus Fanatic
Thread Starter
iTrader: (17)
 
97-SC300's Avatar
 
Join Date: Jun 2006
Location: Earth
Posts: 9,238
Received 131 Likes on 109 Posts
Default

Posting some pics for Dmitry, haven't updated this in a while:

Name:  DSC_0832_zpsrvggc5ef.jpg
Views: 672
Size:  235.0 KB
Name:  DSC_0833_zpsu1554bcj.jpg
Views: 685
Size:  261.6 KB
Name:  DSC_0834_zpsjidkgtqk.jpg
Views: 675
Size:  277.2 KB
Name:  DSC_0835_zpsglbiblal.jpg
Views: 673
Size:  241.2 KB
Name:  DSC_0837_zpsgpszcfch.jpg
Views: 695
Size:  263.3 KB

Name:  DSC_0840_zpsfuovahac.jpg
Views: 680
Size:  219.0 KB
Name:  DSC_0842_zps2wc6lh8g.jpg
Views: 672
Size:  230.4 KB
Name:  DSC_0846_zpsm6gx3owb.jpg
Views: 674
Size:  309.5 KB
Name:  DSC_0847_zpsxa6rpvwn.jpg
Views: 699
Size:  328.1 KB
Name:  DSC_0838_zpsivbsc9vh.jpg
Views: 685
Size:  254.8 KB
Old 05-25-16, 07:23 PM
  #254  
97-SC300
Lexus Fanatic
Thread Starter
iTrader: (17)
 
97-SC300's Avatar
 
Join Date: Jun 2006
Location: Earth
Posts: 9,238
Received 131 Likes on 109 Posts
Default

Painted area where battery tray used to be and no more foglights, didn't clear the 4" pipe. Bumper had to be trimmed a small amount to clear pipe, buffed it afterwards so looks more presentable now!

Cell phone pics


Name:  20160525_174341_resized_zpswualvthj.jpg
Views: 682
Size:  206.0 KB
Name:  20160525_174354_resized_zpsi4ck3p7n.jpg
Views: 679
Size:  180.7 KB
Name:  20160525_174407_resized_zpsswlpnayx.jpg
Views: 668
Size:  225.4 KB
Name:  20160525_183845_resized_zpsvpl9rvyl.jpg
Views: 671
Size:  208.3 KB

Name:  20160525_201851_resized_zpsdguxpzux.jpg
Views: 673
Size:  192.5 KB
Name:  20160525_201934_resized_zps1eslknok.jpg
Views: 681
Size:  194.1 KB
Name:  20160521_131437_resized_zpsyqnocvqp.jpg
Views: 677
Size:  206.6 KB
Name:  20160525_190034_resized_zpstalf4lom.jpg
Views: 655
Size:  179.5 KB

I machine polished the upper 4" pipe (no pics of that yet) and have dropped it off with Tim to shoot it with clear powder coat. It shined up pretty damn well, very happy with it and it's not too blingy. Also will install a rubber weather strip around the hole we cut for the pipe this weekend.
Old 05-25-16, 09:09 PM
  #255  
SSmith
Instructor
iTrader: (7)
 
SSmith's Avatar
 
Join Date: Dec 2001
Location: Texas
Posts: 1,232
Likes: 0
Received 21 Likes on 19 Posts
Default

I hope when my car grows up one day it can be like this beauty. ����

Shane
The following users liked this post:
SC4J (08-08-20)


Quick Reply: 97-SC300 Single Turbo Build Thread



All times are GMT -7. The time now is 12:30 AM.