97-SC300 Single Turbo Build Thread
#17
ENGINE:
Accelerated performance build block
10.0:1 C/P pistons, upgraded pins
BC HD 625+ rods
Clevite bearings
Titan billet mains
AP oil squirter delete
AP micro polished oil pump
ARP 625+ head studs
ARP 625+ main studs
Brand New toyota 2jzgte block core
New water pump
OEM gasket set
HEAD:
HeadGames Pocket port "R" package with ported chambers
GSC S2 CAMS
GSC valve stem seals
GSC beehive valve springs
GSC titanium retainers
Farres keepers
Titan cam gears
Farrea intake/exhaust valves
Shimless buckets
wrinkle black valve covers with -12AN welded fittings
Accesories:
PHR billet tensioner
PHR catch can set up
PHR drive belt pulley set (black)
Titan crank pulley
PHR wended crank gear
PHR power steering line
PHR water neck adaptor
PHR oil filter relocation kit
PHR power steering reservoir kit
Hypertune Race intake manifold w/102mm throttle body
5" thick race intercooler, 3 inch piping for hot side, 4 inch for cold side
FUEL:
ID2000 injectors
PHR billet dual pump hanger with 2x BOSH 044 pumps
-8AN duel feeds
-6AN return to tank
Weldon FPR
Weldon fuel filters x2
Goodridge black braided E85 fuel lines
ECU:
ProEFI 128 ECU
map sensor
IAT sensor
Fuel pressure sensor
flex fuel sensor
oil pressure sensor
wideband sensor
iBoost switch
traction control setup
Can gauge
REAR END:
TRD LSD
TRD bushings for rear subframe
figgs rear diff ear mounts
TRANSMISSION:
OS Giken Triple R3C clutch
SUSPENSION:
KW V3 coilovers
OEM lexus front and rear upper control amrs w/ new hardware
ARP extended studs
TRD strut tower bar
TURBO:
PHR Stage 4 turbo kit
Precision 6870 0.98 A/R turbo
4" downpipe/midpipe
billet collector twin scrool, twin gate manifold
twin tial MVR gates
i am sure there is more that i am forgetting. ill update this once the parts are going to be installed.
Accelerated performance build block
10.0:1 C/P pistons, upgraded pins
BC HD 625+ rods
Clevite bearings
Titan billet mains
AP oil squirter delete
AP micro polished oil pump
ARP 625+ head studs
ARP 625+ main studs
Brand New toyota 2jzgte block core
New water pump
OEM gasket set
HEAD:
HeadGames Pocket port "R" package with ported chambers
GSC S2 CAMS
GSC valve stem seals
GSC beehive valve springs
GSC titanium retainers
Farres keepers
Titan cam gears
Farrea intake/exhaust valves
Shimless buckets
wrinkle black valve covers with -12AN welded fittings
Accesories:
PHR billet tensioner
PHR catch can set up
PHR drive belt pulley set (black)
Titan crank pulley
PHR wended crank gear
PHR power steering line
PHR water neck adaptor
PHR oil filter relocation kit
PHR power steering reservoir kit
Hypertune Race intake manifold w/102mm throttle body
5" thick race intercooler, 3 inch piping for hot side, 4 inch for cold side
FUEL:
ID2000 injectors
PHR billet dual pump hanger with 2x BOSH 044 pumps
-8AN duel feeds
-6AN return to tank
Weldon FPR
Weldon fuel filters x2
Goodridge black braided E85 fuel lines
ECU:
ProEFI 128 ECU
map sensor
IAT sensor
Fuel pressure sensor
flex fuel sensor
oil pressure sensor
wideband sensor
iBoost switch
traction control setup
Can gauge
REAR END:
TRD LSD
TRD bushings for rear subframe
figgs rear diff ear mounts
TRANSMISSION:
OS Giken Triple R3C clutch
SUSPENSION:
KW V3 coilovers
OEM lexus front and rear upper control amrs w/ new hardware
ARP extended studs
TRD strut tower bar
TURBO:
PHR Stage 4 turbo kit
Precision 6870 0.98 A/R turbo
4" downpipe/midpipe
billet collector twin scrool, twin gate manifold
twin tial MVR gates
i am sure there is more that i am forgetting. ill update this once the parts are going to be installed.
Last edited by 97-SC300; 07-11-15 at 10:17 AM.
The following users liked this post:
PJeezy (12-02-18)
The following users liked this post:
Bala501 (02-23-20)