Imprezario's Build - From Moscow With Mods )
#61
Lead Lap
Thread Starter
A friend on mine and IS250 F Sport USB owner has taken a few quick shots. The TOM'S trunk spoiler and RAYS FXX wheels have been installed recently:
Last edited by Imprezario; 06-08-15 at 12:54 PM.
#62
Lead Lap
Thread Starter
The devil is, as always, in the details ))
Here are the original RAYS aluminum valve caps. The red anodized colour perfectly matches the lettering of the wheels' center caps )
Here are the original RAYS aluminum valve caps. The red anodized colour perfectly matches the lettering of the wheels' center caps )
#63
Lead Lap
Thread Starter
Big stuff is on it's place, so time for small additions now )
RAYS steel 17 HEX lug nuts added to complete the RAYS-branded setup and Japan made KYO-EI 5mm spacers and hub rings widen the front track a bit. The rears measured 9.5 ET38 give a perfect stance to my taste, but fronts of 8,5 ET38 are sitting too deep. 5 mm spacers have made the overall setup as good as it can be )
RAYS steel 17 HEX lug nuts added to complete the RAYS-branded setup and Japan made KYO-EI 5mm spacers and hub rings widen the front track a bit. The rears measured 9.5 ET38 give a perfect stance to my taste, but fronts of 8,5 ET38 are sitting too deep. 5 mm spacers have made the overall setup as good as it can be )
Last edited by Imprezario; 06-12-15 at 11:21 AM.
#65
Lead Lap
Thread Starter
#67
Lead Lap
Thread Starter
This is not a mouse - it's LDA-controller for non-Navi multimedia, similar to BMW's iDrive. The recessed area text to the controller is a place to store your iPhone - fits perfectly )) And yes, it's stock.
Last edited by Imprezario; 07-02-15 at 02:54 AM.
#69
Lead Lap
Thread Starter
#72
Lead Lap
Thread Starter
Got some nice shots last night:
Lurking in the dark )
The RAYS Gram Lights FXX are ABSOLUTELY stunning in person:
Debadged rear end:
Lurking in the dark )
The RAYS Gram Lights FXX are ABSOLUTELY stunning in person:
Debadged rear end:
Last edited by Imprezario; 08-01-15 at 01:40 PM.
#73
Lead Lap
Thread Starter
Added 3 mm KYO-EI spacers for the rear wheels - the fitment is really perfect now! ET38 + 3 = 35 ))
Removed the front 5 mm spacers - the hub centric rings were too short and did not center the wheels properly - experienced some high speed wobbling. Ordered a pair of studded hub centric 11 mm for the front end - even with 5 mm the wheels looked too narrow compared to the rears.
Removed the front 5 mm spacers - the hub centric rings were too short and did not center the wheels properly - experienced some high speed wobbling. Ordered a pair of studded hub centric 11 mm for the front end - even with 5 mm the wheels looked too narrow compared to the rears.
#75
Lead Lap
Thread Starter
Japan Post works flawlessly and my spacers are at home ) Here are the reputable KICS 11 mm studded hub centric spacers from KYO-EI:
What's inside:
The spacers have a 73 mm center bore and come with a pair of 60=>60 tall centric rings, so I had to order a set of 60=>73 rings to center my RAYS wheels properly:
Here is how the assembled kit looks:
The build quality and fitment of these parts is exceptional, can't wait to install all this stuff )
What's inside:
The spacers have a 73 mm center bore and come with a pair of 60=>60 tall centric rings, so I had to order a set of 60=>73 rings to center my RAYS wheels properly:
Here is how the assembled kit looks:
The build quality and fitment of these parts is exceptional, can't wait to install all this stuff )