Meanlex build thread
#18
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NY
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Yep i plan on doing something cool to the headlights some led stuff in there, also might get those led tails but not sure i may just end up getting 10-12 tails we shall see. Some interior work but nothing crazy just some diamond patter inserts for the seats.
#21
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NY
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
So a update on the car... Aftermarket bags and control system installed. (ill post pics of the install later on)
The way you see it the front is at the lowest possible setting the upper control arms touching the top of the wheel well. I guess because its AWD the suspension geometry is different, i can get it lower but i would have to cut the upper wheel well so that the upper control arms can go through into the engine bay. Not sure if i really want to do that yet.
The back can tuck in about another 2 inches but i raised the limit to match the front lmk what you guys think so far.
The way you see it the front is at the lowest possible setting the upper control arms touching the top of the wheel well. I guess because its AWD the suspension geometry is different, i can get it lower but i would have to cut the upper wheel well so that the upper control arms can go through into the engine bay. Not sure if i really want to do that yet.
The back can tuck in about another 2 inches but i raised the limit to match the front lmk what you guys think so far.
#27
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NY
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#28
Driver School Candidate
Thread Starter
Join Date: Jun 2012
Location: NY
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts