The Power of Blue 2jzgte vvt-i
#17
The steering wheel is by far one of the most challenging things i've done. First get some 2x2 3k 5.7ouch carbon fiber fabric. Then you need resin and hardner, I recommend testing this process on something small. Keep trying it until you get it down, the hardest part is waiting. You have to wait for the mixture to tact and apply the fabric, the you apply more mixture to seal everything. It's a pretty lengthy process.
#18
Pit Crew
iTrader: (1)
Join Date: May 2011
Location: Texas
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
The steering wheel is by far one of the most challenging things i've done. First get some 2x2 3k 5.7ouch carbon fiber fabric. Then you need resin and hardner, I recommend testing this process on something small. Keep trying it until you get it down, the hardest part is waiting. You have to wait for the mixture to tact and apply the fabric, the you apply more mixture to seal everything. It's a pretty lengthy process.
Post of some pics of the finished product when ready so we can see how it looks with the airbag!
#19
Let me know if you're selling the leftovers from your front clip, and willing to ship it overseas. If the price is right, I might buy some parts from you. Thanks, and good luck with your project.
#23
Pit Crew
iTrader: (1)
Join Date: May 2011
Location: Texas
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ebay.com/itm/VDO-Cockpit-Mechanical-Boost-Pressure-Gauge-2-1-16-Dia-Black-Face-150052-/331314476513?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d23e1b5e1&vxp=mtr
http://www.ebay.com/itm/VDO-Cockpit-Turbo-Boost-Gauge-150-921-w-Line-Kit-SUPER-LOW-PRICE-/321530514377?pt=LH_DefaultDomain_0&hash=item4adcb64bc9
#24
Pit Crew
iTrader: (1)
Join Date: May 2011
Location: Texas
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ebay.com/itm/VDO-Cockpit-Mechanical-Boost-Pressure-Gauge-2-1-16-Dia-Black-Face-150052-/331314476513?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d23e1b5e1&vxp=mtr
http://www.ebay.com/itm/VDO-Cockpit-Turbo-Boost-Gauge-150-921-w-Line-Kit-SUPER-LOW-PRICE-/321530514377?pt=LH_DefaultDomain_0&hash=item4adcb64bc9
#25
I found a couple of gauges in in florida i may go with for now until I finish my interior.
Here she is: This motor is really strong and aggressive I can definitely have a little fun during my local commute. I have a feeling that this is my daily, I'm going to mod it than say I need a daily. Should be fun.
Here is a morning shot redid the lights, cleared them up really nice fresh paint on the housing, and i did a new DRL I'll post pics later. The cut off and alignment is spot on used spacers so very satisfied with the results.
Here she is: This motor is really strong and aggressive I can definitely have a little fun during my local commute. I have a feeling that this is my daily, I'm going to mod it than say I need a daily. Should be fun.
Here is a morning shot redid the lights, cleared them up really nice fresh paint on the housing, and i did a new DRL I'll post pics later. The cut off and alignment is spot on used spacers so very satisfied with the results.
#27
Lexus Champion
iTrader: (2)
Carbon trim and red door inserts!
Attachment 343289
A couple of pix of my current setup.
Attachment 343290
Attachment 343291
Attachment 343289
A couple of pix of my current setup.
Attachment 343290
Attachment 343291
nice set up bud!
you should really do a detailed step by step on the CF