*Dave's gs4hunna build*
08-15-14, 11:04 PM
#17
Driver School Candidate
Thread Starter
Next parts to come are Front and rear strut tower brace. Most likely going to get the trd one because its all on piece. for the rear I will find a similar style one but if its multi piece I won't mind. This is once I have my suspension taken care of tho. Upcoming pay check is going to cover moog lbjs and poly steering rack bushings. Ill see if I can squeeze maybe front or rear adjustable end links for the sway. Really looking to build this car the right way. lol
08-17-14, 08:16 PM
#19
Driver School Candidate
Thread Starter
08-26-14, 04:24 PM
#20
Driver School Candidate
Thread Starter
Alright so I haven't been posting on here in a while. Barely started working again so It's time to save up and start building this car more. 
Did an oil change my first paycheck damn felt good (:
Also did a couple easy mods :
Wired aux port into my stock changer. Thank god I didn't buy a cassette adapter , this was cheaper too. lol
Second one I did the diy drl mod. Too easy Too Sick!
Finally changed my filter , went with the spectre cuz it was 17 bucks with my employee discount. Cant beat that.
Did an oil change my first paycheck damn felt good (:
Also did a couple easy mods :
Wired aux port into my stock changer. Thank god I didn't buy a cassette adapter , this was cheaper too. lol
Second one I did the diy drl mod. Too easy Too Sick!
Finally changed my filter , went with the spectre cuz it was 17 bucks with my employee discount. Cant beat that.
09-08-14, 03:39 PM
#22
Driver School Candidate
Thread Starter
They are pretty stiff but not stiff enough even with the swaybars corrected with figs endlinks. Im going to give them a call and go with 20k/18k. Really want this car to be stiffer than my s13.
09-08-14, 03:50 PM
#23
Driver School Candidate
Thread Starter
Haven't really posted anything up on here for a koo min...
These came in the mail a while back, overall I recommend them because they correct the positioning of the sway bar.
But my ride is still not where i want it to be... Going to order trd sways once I get all my arms, Upcoming paycheck is going to be 30mm rca's with new ball joints from rockauto with some poly steering rack bushings.
Recently I ordered these babies from JP (:
Talked to a friend of mine from HIDILLUSIONZ and got some good info on my headlight retro fit upcoming.
I figured since I'm going with q45 projectors and the headlight lenses are one piece I might as well do a quad projector set-up and get it done once.
This is what I am going for... Wish me luck(:
These came in the mail a while back, overall I recommend them because they correct the positioning of the sway bar.
But my ride is still not where i want it to be... Going to order trd sways once I get all my arms, Upcoming paycheck is going to be 30mm rca's with new ball joints from rockauto with some poly steering rack bushings.
Recently I ordered these babies from JP (:
Talked to a friend of mine from HIDILLUSIONZ and got some good info on my headlight retro fit upcoming.
I figured since I'm going with q45 projectors and the headlight lenses are one piece I might as well do a quad projector set-up and get it done once.
This is what I am going for... Wish me luck(:
09-09-14, 05:33 PM
#25
Driver School Candidate
Thread Starter
09-11-14, 01:02 AM
#30
Driver School Candidate
Thread Starter