Ultra White/ Rioja / 350 AWD
01-13-15, 08:29 AM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
Quote:
Originally Posted by
albertgoq
Thanks again 265/35/r18 it is, will it look stretched on a 9.5 rin?
BTW what wheel specs and offsets you have up front?
the 275 I have on my rear is very full, I would think the 265 would be good on the 9.5 rim.
01-16-15, 06:37 AM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
01-19-15, 07:56 PM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
01-21-15, 11:00 PM
Advanced
Join Date: Nov 2014
Location: CA
Posts: 625
What diffuser is that and how hard was it to install it?
01-22-15, 08:11 AM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
Quote:
Originally Posted by
anthonys2r
What diffuser is that and how hard was it to install it?
It is the Seibon, I had it installed, but there is a CL member that did it himself. They say it is easier if you remove the rear bumper.
I had 168 Motoring install mine...
I just didn't want to take a risk of installing incorrectly. I know that there are dome bolts and clips that he used... Hope that helps...
01-22-15, 09:02 AM
Advanced
Join Date: Nov 2014
Location: CA
Posts: 625
Quote:
Originally Posted by
NVMarkus
It is the Seibon, I had it installed, but there is a CL member that did it himself. They say it is easier if you remove the rear bumper.
I had 168 Motoring install mine...
I just didn't want to take a risk of installing incorrectly. I know that there are dome bolts and clips that he used... Hope that helps...
Thanks
Would you be able to get a few more shots and different angles of it? Much appreciated!
01-23-15, 06:47 AM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
Good side shot...
01-23-15, 10:04 AM
Advanced
Join Date: Nov 2014
Location: CA
Posts: 625
Man... I like it a lot! Will probably pull the trigger on it sometime soon
01-23-15, 07:26 PM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
and here too is sound of JoeZ PTS Catback for theAWD
02-01-15, 03:24 PM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
02-01-15, 03:25 PM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
Oh and black vinyl on the roof
02-05-15, 04:57 PM
Driver
Join Date: Mar 2010
Location: MA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
NVMarkus
Oh and black vinyl on the roof
which brand did you use? also how easy was it and how much was it? Looks really nice. trying to decide between glossy black, matte black, or carbon fiber
02-06-15, 06:37 AM
Lead Lap
Thread Starter
Join Date: May 2014
Location: NV
Posts: 591
Likes: 0
Quote:
Originally Posted by
KS13
which brand did you use? also how easy was it and how much was it? Looks really nice. trying to decide between glossy black, matte black, or carbon fiber
I had it done at a shop, I will ask them what brand. I got the glossy black because I like the look of the gloss. my next choice would have been carbon fiber, and that would be because that one is a lot thicker and would not show blemishes and doesn't scratch easily.
Relatively inexpensive around the $200 mark.
02-06-15, 09:24 PM
Driver School Candidate
Join Date: Jan 2015
Location: NV
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Are you in Vegas? Cars looking great and sounding great! Trying to get there myself
02-06-15, 09:53 PM
Lexus Test Driver
Join Date: Dec 2014
Location: CA
Posts: 917
More angles with the lip!! Tankksss! Are you going to get side skirts? Looking good! Sounds good too!