Lutkis

Do you have a pic of the rear wheels on?
I'm getting 265/30 to 11" wheel too (ET20 though) and I'd like to see how much it'll stick out with stock height and camber.

hcharlesc3

iTrader: (4)

I'll post a picture later today but it's going to stick out a little less than the front.

armanitran

iTrader: (-1)

Welcome to CL. Can't wait to see the progress on your car!

hcharlesc3

iTrader: (4)

Got my figs #2 caster bushings and my swaybar end links for the front and rear are on the way.

tiger4life

iTrader: (16)

when are you going to do the brake fit check?

hcharlesc3

iTrader: (4)

I'm still waiting to get the brackets from LRD. He said they shop that makes them should have them ready for tomorrow. So I'll probably test fit them over the weekend.

hcharlesc3

iTrader: (4)

Rear wheel

hcharlesc3

iTrader: (4)

Looks like I'm going to have to adjust the camber quite a bit

tmf2004

iTrader: (15)

adjust camber maybe but also a pull to bring the fender out...

hcharlesc3

iTrader: (4)

Shave and pull is a must..... I may sell these and get something with a less aggressive offset

NorthStyle

iTrader: (16)

The fronts will be fine with just rolling, the rears you will need to shave and pull it slightly. The only reason they stick out so much is because your car hasn't been lowered; due to our suspension type, the wheels will naturally camber in more the lower the car is.

hcharlesc3

iTrader: (4)

Do you think it will camber in a lot? I don't want to be running through tires like crazy

Sevenevez

iTrader: (2)

good progress.

hcharlesc3

iTrader: (4)

Thanks

NorthStyle

iTrader: (16)

Yeah, a decent amount. If you're worried about tires then just make sure your toe is in spec.