My fiberglass / air suspension build
05-05-14, 03:45 PM
#1
My fiberglass / air suspension build
I've been wanting to do this for a while and finally got all of the parts and the time to do it so here it is! I'll save the long story and just give you a quick rundown followed by everyones favorite thing....PICS!
I built two fiberglass boxes for my 12's to regain my trunk space. It took me about a week of working on it after work and on my days off. I used about 1.5 gallons of resin and a ton of fiberglass mat. The build went pretty smooth, it's just time consuming!
As for the air suspension I went with the Autopilot V2(absolutely zero complaints with this system) and a set of tanabe sustec coilovers with UAS bags. I'm running 2 Viair 444c compressors, a 5 gal aluminum tank hand polished by me, 3/8 line etc etc.
Like I said, quick rundown
If you have any questions feel free to ask!
I built two fiberglass boxes for my 12's to regain my trunk space. It took me about a week of working on it after work and on my days off. I used about 1.5 gallons of resin and a ton of fiberglass mat. The build went pretty smooth, it's just time consuming!
As for the air suspension I went with the Autopilot V2(absolutely zero complaints with this system) and a set of tanabe sustec coilovers with UAS bags. I'm running 2 Viair 444c compressors, a 5 gal aluminum tank hand polished by me, 3/8 line etc etc.
Like I said, quick rundown
If you have any questions feel free to ask!
05-05-14, 05:35 PM
#5
Lead Lap
Join Date: Dec 2013
Location: AZ
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
I must have had a faulty unit because mine didn't work very well. They're sending me a new one along with a new controller. Hopefully it works as well as yours. What is your ride height pressure? Do you use the rise on start with the presets?
).
