Build Threads Details on Club Lexus 2GS owner vehicles

My GS400 modding journal - commenced Feb. 2003

Thread Tools
 
Search this Thread
 
Old 05-05-16, 08:49 PM
  #961  
cone_killr
Driver
iTrader: (1)
 
cone_killr's Avatar
 
Join Date: Jun 2005
Location: SoCal
Posts: 69
Received 9 Likes on 8 Posts
Default

How brittle are your harness connectors? I had a cam sensor code and it was due to a broken connector at the sensor. The engine heat is a killer of those plastic connector bodies.
Old 05-10-16, 05:48 AM
  #962  
Hameed
EV ftw!!!

Thread Starter
 
Hameed's Avatar
 
Join Date: Nov 2002
Location: Lake Ontario
Posts: 8,438
Received 213 Likes on 117 Posts
Default

Originally Posted by cone_killr
How brittle are your harness connectors? I had a cam sensor code and it was due to a broken connector at the sensor. The engine heat is a killer of those plastic connector bodies.
No idea as the car is at the body shop.

A local Lexus dealer diagnosed the issue as being the ECU needs to be replaced as the cylinders are NOT mis-firing.

The dealer then said it will take a while to find an ECU due to the age of the car. Anyway, they finally found a replacement somewhere in the US and apparently it will be another 2 weeks before they can get it here. I don't get this part.........

They found the part somewhere in the US, but can't get it for two weeks???
Old 05-10-16, 08:43 PM
  #963  
azndriver
Driver
 
azndriver's Avatar
 
Join Date: Jan 2012
Location: Toronto, ON
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Default

Seeing how the car is not starting and I had a very simliar issue with the cam sensor and would not allow the car to start.

here is what my mechanic replaced:

Brand New Battery + Replaced both terminals to military style terminals + thicker Ground wire
Fuel Pump replaced w/ DeatschWerks Unit with all OEM toyota fuel related parts
OEM Toyota Front Cam sensor (near or under the timing belt)
Any fuses under both under the hood and inside the vehicle, inspected and replaced accordingly

Old gas was drained out of the tank and the car fired right up on the first try .

So with that being said, as only a suggestion above, but I would check the front cam senor (due to front end collision) and under the hood fuses, as well, check the status of the battery as the car has been sitting for a while

I am also wondering, could it be possible that your key has lost programing or that maybe one of the airbag sensor's may have been triggered, not allowing it to start.

As well if all else fails, there is a person on this forum who sells salvaged parts, in which I have bought and picked up at the boarder and brought back.

Good luck and hope you find a solution to your problem
Old 05-11-16, 08:36 AM
  #964  
Hameed
EV ftw!!!

Thread Starter
 
Hameed's Avatar
 
Join Date: Nov 2002
Location: Lake Ontario
Posts: 8,438
Received 213 Likes on 117 Posts
Default

Originally Posted by azndriver
Seeing how the car is not starting and I had a very simliar issue with the cam sensor and would not allow the car to start.

here is what my mechanic replaced:

Brand New Battery + Replaced both terminals to military style terminals + thicker Ground wire
Fuel Pump replaced w/ DeatschWerks Unit with all OEM toyota fuel related parts
OEM Toyota Front Cam sensor (near or under the timing belt)
Any fuses under both under the hood and inside the vehicle, inspected and replaced accordingly

Old gas was drained out of the tank and the car fired right up on the first try .

So with that being said, as only a suggestion above, but I would check the front cam senor (due to front end collision) and under the hood fuses, as well, check the status of the battery as the car has been sitting for a while

I am also wondering, could it be possible that your key has lost programing or that maybe one of the airbag sensor's may have been triggered, not allowing it to start.

As well if all else fails, there is a person on this forum who sells salvaged parts, in which I have bought and picked up at the boarder and brought back.

Good luck and hope you find a solution to your problem
Thanks for the feedback.

The Erin Park Lexus dealer has diagnosed the issue and has ordered the ECU and the drivers side air bag sensor to address the cam sensor error code. That's the short version of the story.

The car is starting no problem.

Crossing my fingers now and hoping that nothing else comes up.
The following users liked this post:
tiguy99 (01-02-19)
Old 05-16-16, 06:13 PM
  #965  
chungmeow
Driver School Candidate
 
chungmeow's Avatar
 
Join Date: Oct 2014
Location: IL
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

You are my hero.
Old 05-19-16, 06:50 AM
  #966  
Hameed
EV ftw!!!

Thread Starter
 
Hameed's Avatar
 
Join Date: Nov 2002
Location: Lake Ontario
Posts: 8,438
Received 213 Likes on 117 Posts
Default

Originally Posted by chungmeow
You are my hero.
The repair is being done by a body shop, not me.
Old 05-19-16, 07:18 AM
  #967  
Hameed
EV ftw!!!

Thread Starter
 
Hameed's Avatar
 
Join Date: Nov 2002
Location: Lake Ontario
Posts: 8,438
Received 213 Likes on 117 Posts
Default

Car is finally done!!!!!

I'll pick up the car tonight after work and post better pics this weekend. Here it is getting a final detail.
Attached Thumbnails My GS400 modding journal - commenced Feb. 2003-img_6820.jpg   My GS400 modding journal - commenced Feb. 2003-img_6821.jpg  
Old 05-19-16, 09:21 AM
  #968  
Hameed
EV ftw!!!

Thread Starter
 
Hameed's Avatar
 
Join Date: Nov 2002
Location: Lake Ontario
Posts: 8,438
Received 213 Likes on 117 Posts
Default

And a couple more outside the bodyshop
Attached Thumbnails My GS400 modding journal - commenced Feb. 2003-img_6822.jpg   My GS400 modding journal - commenced Feb. 2003-img_6823.jpg   My GS400 modding journal - commenced Feb. 2003-img_6824.jpg   My GS400 modding journal - commenced Feb. 2003-img_6825.jpg   My GS400 modding journal - commenced Feb. 2003-img_6828.jpg  

Old 05-19-16, 09:35 AM
  #969  
ksultan78
Rookie
 
ksultan78's Avatar
 
Join Date: Mar 2011
Location: FL
Posts: 82
Received 2 Likes on 2 Posts
Default damn....

thats one bad *** looking gs4. Thanks for sharing the pics. I am jealous of your retros
Old 05-19-16, 12:17 PM
  #970  
SoCal Cyco
Pole Position
iTrader: (20)
 
SoCal Cyco's Avatar
 
Join Date: Dec 2007
Location: SoCal
Posts: 3,117
Received 36 Likes on 31 Posts
Default

congrats on getting her back, but why do the head lights look a little hazzy?
Old 05-19-16, 01:47 PM
  #971  
Hameed
EV ftw!!!

Thread Starter
 
Hameed's Avatar
 
Join Date: Nov 2002
Location: Lake Ontario
Posts: 8,438
Received 213 Likes on 117 Posts
Default

Originally Posted by SoCal Cyco
congrats on getting her back, but why do the head lights look a little hazzy?
Maybe the headlights from the donor car were so badly faded that the polishing done couldn't clear them? Not sure right now. But you're right the drivers side definitely looks very hazy.
Old 05-30-16, 09:25 AM
  #972  
Hameed
EV ftw!!!

Thread Starter
 
Hameed's Avatar
 
Join Date: Nov 2002
Location: Lake Ontario
Posts: 8,438
Received 213 Likes on 117 Posts
Default

Something I'm planning to do with some cosmetic vinyl.
Attached Thumbnails My GS400 modding journal - commenced Feb. 2003-img_6823.jpg  
Old 05-30-16, 02:05 PM
  #973  
Ava92
Pole Position
iTrader: (3)
 
Ava92's Avatar
 
Join Date: Jul 2013
Location: CAN
Posts: 367
Likes: 0
Received 1 Like on 1 Post
Default

That is sexy, I have a soft spot for the stock wing and tails, your car wears them well
Old 05-30-16, 05:35 PM
  #974  
tmf2004
5% Club. Killing it!!!
iTrader: (15)
 
tmf2004's Avatar
 
Join Date: Nov 2004
Location: FL
Posts: 21,942
Received 63 Likes on 61 Posts
Default

looks great.. worth the wait...
Old 06-01-16, 06:24 PM
  #975  
sugzz
Pole Position
iTrader: (9)
 
sugzz's Avatar
 
Join Date: Apr 2008
Location: New York
Posts: 324
Received 4 Likes on 3 Posts
Default

Congrats on getting the car back, it looks good. Please dont park her on the street anymore


Quick Reply: My GS400 modding journal - commenced Feb. 2003



All times are GMT -7. The time now is 01:52 PM.