My Sc 2J build
#46
Driver
Thread Starter
Join Date: May 2013
Location: Fl
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
#48
Driver
Thread Starter
Join Date: May 2013
Location: Fl
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
This past weekend I picked up a pair of Greddy pans....one of them is slightly bent, but should be a small fix. Aside from that I'm a happy camper. Here are some pics before I get it fixed and polished up
#49
Driver
Thread Starter
Join Date: May 2013
Location: Fl
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
******************update******************
So after a few weeks of absolutely doing nothing, I finally decided to purchase my intercooler kit which should be arriving some time next week..... Along with that, still haven't fixed my pans but I managed to clean them up a bit. It needs to be finished off with some polish but I"ll jus wait till I get that one pan welded up. I must say it looks alot better than it did before, overall, My main focus is getting the engine together so it can be ready for installation. Patience is a ****
So after a few weeks of absolutely doing nothing, I finally decided to purchase my intercooler kit which should be arriving some time next week..... Along with that, still haven't fixed my pans but I managed to clean them up a bit. It needs to be finished off with some polish but I"ll jus wait till I get that one pan welded up. I must say it looks alot better than it did before, overall, My main focus is getting the engine together so it can be ready for installation. Patience is a ****
#50
Driver
Thread Starter
Join Date: May 2013
Location: Fl
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
#55
Driver
Thread Starter
Join Date: May 2013
Location: Fl
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Soooo, as I was opening my father's day card on Sunday I was surprised with an driftmotion receipt with a few parts listed......lol YUP! Come to find out my wife ordered my Aristo 2jz Dp gasket, Aristo 2jz exhaust flange, and my 2jz Motor Mounts. Couldn't ask for a better woman so hopefully it should arrive sometime next week and I' ll post pics once they arrive. Thanks for the support guys
#57
Driver
Thread Starter
Join Date: May 2013
Location: Fl
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Haven't really had time to post so I apologize for the late update. My driftmotion shipment arrived with the 2jz exhaust flange, DP gasket, and motor mount instead of "mounts". Unfortunately 1 was purchased instead of 2. Also, i still need to order a shifter boot and throttle cable before I start the process of the conversion. I think I'm ready guys stay tuned.....