Sternb818 - IS250 F-Sport Build Thread
06-16-14, 08:43 PM
#1
Lead Lap
Thread Starter
Sternb818 - IS250 F-Sport Build Thread
Hey guys! I have had the car for 9 months so far and it has been very slow. Things didn't kick off till about 2 months ago and I forgot to start a build thread. Here is my car and what I have done so far. More things will come soon but with a wait which is no big deal. Hope you guys like what you see!
2014 Lexus IS250 F-Sport RWD
Ultra White/Black
Navigation Package and F-Sport Package
September 1st, 2013
Picked the car up from Lexus of North Miami Beach. I ordered it back in August but they didn't have any Ultra White cars at the time. This was the only one coming in to the state when I went to buy it.
October 15th, 2013
Got my windows and tail lights tinted. Don't have pics of windows but you can see it in the other pictures. I did 15% all around and the strip on the front as well as the tail lights minus the reverse/turn signal.
Got some pictures from the first car meet I went to. It was Cars and Coffee hosted by LexusBoys and I brought my stock car to it lol. I met some cool people and I even got to park next to a familiar face on the forums. My car looks 10x higher than his in these pictures. I also have one at the gas station with my buddy and his Acura TSX before the meet.
November 22nd, 2013
I installed my Greddy intake thanks to a friend of mine and a helpful tutorial on the forums. This thing sounds amazing and I love it. I'm not sure if it has any performance enhancements (more hp, torque, etc.) but it sounds really good in my opinion.
*Sorry for the bad quality. Had to take it from my friends Instagram because I lost the picture.*
April 4th, 2014
Fast forward all the way to April where I began to get some bigger things for the car. This was the day where I got my new wheels. I got a set of 20" Vossen CV5 Matte Graphite Machined. I have been saying since the day I got the car that I was going to put CV5's on it and I finally did. These pictures are all at stock height. The wheel specs are 20x9 +32 in the front and 20x10.5 +45 in the rear. The tires are stretched because I did plan on lowering the car.
June 12th, 2014
After months and months of waiting, I finally received my springs for my car. I went with RS*R Down Springs because they were the best fit for my wheels without any fender modifications. The drop is excellent and the ride is really good. I love the way they look with my CV5's. I wasn't able to get any pics from the shop because I left the car there all day but I got some pictures after they were done.
More things are coming soon but in time. I'm waiting on one part to be released so I am waiting for that to come out before I order the other part that goes with it. It might be complete by the end of the summer which would be great.
2014 Lexus IS250 F-Sport RWD
Ultra White/Black
Navigation Package and F-Sport Package
September 1st, 2013
Picked the car up from Lexus of North Miami Beach. I ordered it back in August but they didn't have any Ultra White cars at the time. This was the only one coming in to the state when I went to buy it.
October 15th, 2013
Got my windows and tail lights tinted. Don't have pics of windows but you can see it in the other pictures. I did 15% all around and the strip on the front as well as the tail lights minus the reverse/turn signal.
Got some pictures from the first car meet I went to. It was Cars and Coffee hosted by LexusBoys and I brought my stock car to it lol. I met some cool people and I even got to park next to a familiar face on the forums. My car looks 10x higher than his in these pictures. I also have one at the gas station with my buddy and his Acura TSX before the meet.
November 22nd, 2013
I installed my Greddy intake thanks to a friend of mine and a helpful tutorial on the forums. This thing sounds amazing and I love it. I'm not sure if it has any performance enhancements (more hp, torque, etc.) but it sounds really good in my opinion.
*Sorry for the bad quality. Had to take it from my friends Instagram because I lost the picture.*
April 4th, 2014
Fast forward all the way to April where I began to get some bigger things for the car. This was the day where I got my new wheels. I got a set of 20" Vossen CV5 Matte Graphite Machined. I have been saying since the day I got the car that I was going to put CV5's on it and I finally did. These pictures are all at stock height. The wheel specs are 20x9 +32 in the front and 20x10.5 +45 in the rear. The tires are stretched because I did plan on lowering the car.
June 12th, 2014
After months and months of waiting, I finally received my springs for my car. I went with RS*R Down Springs because they were the best fit for my wheels without any fender modifications. The drop is excellent and the ride is really good. I love the way they look with my CV5's. I wasn't able to get any pics from the shop because I left the car there all day but I got some pictures after they were done.
More things are coming soon but in time. I'm waiting on one part to be released so I am waiting for that to come out before I order the other part that goes with it. It might be complete by the end of the summer which would be great.
06-17-14, 07:43 AM
#4
Lead Lap
Thread Starter
Thanks! Glad I finally got my springs installed after waiting so long.
Trending Topics
07-02-14, 10:43 AM
#11
Lead Lap
Thread Starter
07-22-14, 07:32 PM
#13
looks amazing. any chance you have put anyone in the back to see if you would get any rubbing. Down springs go on tomorrow. about 90% sure i am going to go with the 20" cv3's mattte black with the machined face.
07-22-14, 08:17 PM
#14
Lead Lap
Thread Starter
I've had friends in the back seat and no issues with driving. Just go really slow on speed bumps. Went a little to fast on one the other day not realizing and it did rub but nothing major.
