Widest/Most Aggressive is250? Lets go
03-16-14, 11:41 AM
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Nov 2011
Location: Maryland
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Widest/Most Aggressive is250? Lets go
Dropped my car off at Supreme Customs Garage in Homestead, Florida exactly 2 weeks ago. Here's what's going down
-Repair cracked authentic vertex side skirt(off in pics)
-Molded trunk with raised quarters
-Shaved roof antenna, wrap in gloss black
-Custom trunk, no hard-lines or anything crazy, just a false floor, etc
-Wrap interior trim pieces in brushed aluminum
-Tint windshield
-Custom rear camber arms
-Custom rear toe arms
-Custom rear bumper brackets
-Install and customize front Megan UCA
-Wrap entire car in color that has not been seen stateside, ever (no I'm not saying the color name yet)
-Oh yeah, and fit 19x12 -10 SSR MS3's in the rear with stock body metal
-Fronts are 19x10, will have a 12mm-15 spacer, with a little fender work as well
The day I dropped it off!
The SSR's
-Trunk Work
The original screws/hardware are useless, so rivets are the way to go!
^^ I know it looks uneven, more sanding was done after picture was taken
Camber adjustment/Fender Work
My ride height is pretty much almost aired out, I have videos on Instagram to show it move backwards and forwards. Custom brackets were made to allow the rear bumper to re-align with the extended quarters. _o0hkillem is my IG name ( its the letter o, then the number zero). I will be updating as much as I can, but check my IG out for quicker updates!
UPDATE MARCH 18TH, 2014
Drivers side almost done, had issues with wheels making contact with the bag at ride height (passenger side did not have this issue), with some custom camber **** it got figured out
Here's the wrap combo I have, one is car, one is roof, one is interior trim..... :-D
This is the black
Custom bracket to allow the bumper to sit wider, along with other little things up top as well
And better shot of the right ride, wheel-less
-Repair cracked authentic vertex side skirt(off in pics)
-Molded trunk with raised quarters
-Shaved roof antenna, wrap in gloss black
-Custom trunk, no hard-lines or anything crazy, just a false floor, etc
-Wrap interior trim pieces in brushed aluminum
-Tint windshield
-Custom rear camber arms
-Custom rear toe arms
-Custom rear bumper brackets
-Install and customize front Megan UCA
-Wrap entire car in color that has not been seen stateside, ever (no I'm not saying the color name yet)
-Oh yeah, and fit 19x12 -10 SSR MS3's in the rear with stock body metal
-Fronts are 19x10, will have a 12mm-15 spacer, with a little fender work as well
The day I dropped it off!
The SSR's
-Trunk Work
The original screws/hardware are useless, so rivets are the way to go!
^^ I know it looks uneven, more sanding was done after picture was taken
Camber adjustment/Fender Work
My ride height is pretty much almost aired out, I have videos on Instagram to show it move backwards and forwards. Custom brackets were made to allow the rear bumper to re-align with the extended quarters. _o0hkillem is my IG name ( its the letter o, then the number zero). I will be updating as much as I can, but check my IG out for quicker updates!
UPDATE MARCH 18TH, 2014
Drivers side almost done, had issues with wheels making contact with the bag at ride height (passenger side did not have this issue), with some custom camber **** it got figured out
Here's the wrap combo I have, one is car, one is roof, one is interior trim..... :-D
This is the black
Custom bracket to allow the bumper to sit wider, along with other little things up top as well
And better shot of the right ride, wheel-less
Last edited by o7iS250; 03-18-14 at 05:29 PM. Reason: Updates
