1JZ, ProEFI, 6465, Injector Dynamics
09-13-14, 04:24 AM
#63
Driver
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Tn
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
As promised, I have some numbers for you guys. I've been busy with my two jobs so I haven't had as much time as I'd like, but today I set aside some time, strapped her to the DYNO and did some tuning. I didn't get too aggressive with the map but I was decently happy with the numbers I suppose. This is on 91 pump and 17-18 psi.
427whp/401ft. Lbs
Taking her out for a bit tomorrow night. I'll post up some pics.
427whp/401ft. Lbs
Taking her out for a bit tomorrow night. I'll post up some pics.
12-15-14, 09:38 AM
#67
Driver
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Tn
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Well figured I'd update this thread a little. We had a roll race event here in AZ this last weekend and I was asked by my friends shop to be a stand in, in case one of their shop cars couldn't make it. In order to make my car more useful, I installed the ProEFI flex fuel sensor, threw some e85 in and had it retuned. Below are the numbers we got. And yes, this is through my w58.
517 was at 22psi
532 was at 24-25
As always I'd like to say a big thanks to Oumar and Clint (phoenyx084). These guys are always willing to lend a hand or some motivation.
517 was at 22psi
532 was at 24-25
As always I'd like to say a big thanks to Oumar and Clint (phoenyx084). These guys are always willing to lend a hand or some motivation.
Last edited by Knuckleup; 12-15-14 at 09:48 AM.
12-15-14, 05:51 PM
#68
gte & na-t
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Congrats My Friend! You are on the right patch with some camshafts it would pick another 50whp..so your numbers are right on the money!
With some camshafts and Trans and a second pump I see 700whp with no issues!
I am really happy for you Correll ! I am glad I was able to help.
With some camshafts and Trans and a second pump I see 700whp with no issues!
I am really happy for you Correll ! I am glad I was able to help.
12-17-14, 07:50 PM
#71
Knuckle,
When you installed the proefi128 did you happen to write down all the pin out wires that attach to the factory wiring? Basically 128 wires to the color coded factory wiring. I'm changing over soon from aem1 to the 128 and that would be very helpful.
Shane
When you installed the proefi128 did you happen to write down all the pin out wires that attach to the factory wiring? Basically 128 wires to the color coded factory wiring. I'm changing over soon from aem1 to the 128 and that would be very helpful.
Shane
Thread
Thread Starter
Forum
Replies
Last Post
