my 95 sc3 build
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2013
Location: Tx
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
my 95 sc3 build
So i bought a 95 sc in october and its my first. Had alot of nissan platforms and of course honda before that. First off jesus christ ive been missing out this is an amazing platform. Now the story so far.
Found a 95 sc 176k miles for 800 dollars one day on craigslist and thought it was so cheap i had to jump on it. Car has a decent body, most interior missing. Oil leaks everywhere but ran fine and everything on the car is in working order.
My plans:
5spd conversion
Na-t
Coilovers
Somewhat restore
Custom made tan leather bucket seats
97+ tails
New paint
Bodykit (undecided)
What ive done.
-W58 5spd conversion
~parts used
96 sc W58
Comp flywheel
DM manual conversion set
DM 1 piece shaft and adapter (bc i couldnt seem to be given the correct front half from anybody)
Toyota oem slave cylinder
Custom made tranmount and fabricated crossmember
-Cx racing coilovers (these "cheap" coilovers have almost 100% good reviews and people run them 3+ years no problems.
I have most of the turbo kit together except ems, fuel pump, and injectors
Replaced gaskets and fixed most oil leaks, including f/r main seals.
Pics in a few mins
Found a 95 sc 176k miles for 800 dollars one day on craigslist and thought it was so cheap i had to jump on it. Car has a decent body, most interior missing. Oil leaks everywhere but ran fine and everything on the car is in working order.
My plans:
5spd conversion
Na-t
Coilovers
Somewhat restore
Custom made tan leather bucket seats
97+ tails
New paint
Bodykit (undecided)
What ive done.
-W58 5spd conversion
~parts used
96 sc W58
Comp flywheel
DM manual conversion set
DM 1 piece shaft and adapter (bc i couldnt seem to be given the correct front half from anybody)
Toyota oem slave cylinder
Custom made tranmount and fabricated crossmember
-Cx racing coilovers (these "cheap" coilovers have almost 100% good reviews and people run them 3+ years no problems.
I have most of the turbo kit together except ems, fuel pump, and injectors
Replaced gaskets and fixed most oil leaks, including f/r main seals.
Pics in a few mins
#5
Driver School Candidate
Thread Starter
Join Date: Oct 2013
Location: Tx
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. Overall plan is for drifting. Just ordered aem v2 6101. Also cutting 15mm on the knuckles then rewelding for more angle. I should have build complete in 2-4 weeks. Many pics coming
Thread
Thread Starter
Forum
Replies
Last Post