JEBAAY

I think a blue would set it off

Samda515

iTrader: (1)

Nice wheels. Can't wait to see the wide body and those wheels mounted on!

tiger4life

iTrader: (16)

very weird that the 295 isn't stretched more on a 13

VIP161

iTrader: (3)

Yeah I thought the same thing. Now I'm thinking I should go 285 or even 275 on my 18X13s.

tiger4life

iTrader: (16)

Maybe he measured from the outside of the barrels instead of the inside. Another member had a 325/25 on a 13 and it was stretched. I have a 255/35 on an 11 and it's stretched a good bit. The 295/30 sidewall is the same height but not stretched as much even though his tires would theoretically be stretched 10 more mm's than mines. I know PS2's run huge though.

entryspeed

iTrader: (3)

The photo doesn't show the stretch but they are indeed stretched and I can measure at least i've been telling my self since high school its 12 inches right!!!!!

Bippu147

iTrader: (9)

20x13 with a 325/25 tire

jadu

iTrader: (42)

I see a slight stretch. cant wait to see more pics of this rocket bunny style build

NorthStyle

iTrader: (16)

Like tiger4life said: did you measure from the outside of the barrels or the inside? If you measured from the outside, and they measured 12", then I'm pretty sure you're on an 11-11.5" wheel... unless I have my thinking backwards?

twojayzee

Any Updates ?

perrychad1

Was about to post same thing. Starting to wonder if i got all excited for no reason

entryspeed

iTrader: (3)

First page update PARTS IN and yes guys I can measure inside mounting is 12.7 inches note the 325/25 you posted is a completely different beast each side wall ratio increase actually reduces the amount of stretch so if they made a 295/25/20 it would actually expose the lips on the rims and be more dysfunctional then functional. Now also note the picture angle is terrible as actual real life sees the tire stretched about 2/3inch off of each lip both outer and inner.

entryspeed

iTrader: (3)

Oh and I forgot so asking this Carbon fiber hood and trunk? Looking at oem fit nothing vented. Also carbon fiber front splitter yea or nah? Im also trying to steel the design of the is350 carbon rear diffuser and adapt it to the GS. One last thought we're seriously thinking of keeping the 1uzfe building them and mating it to a nissan 350/370 6 speed manual transmission as they are abundant and 1/3 the price of LSX t56's

tmf2004

iTrader: (15)

thanks for the update but I don't know what I'm looking at lol. all I see is a box?

entryspeed

iTrader: (3)

Unfortunately that's the point a little secretive till we do some actual fitting sorry but that's why its a tease. We have some full days we can put in on the car so I will photo the car when its in the white primer and that will be the first look at the kit. Till then what does every one think oem carbon hood and trunk with explosion 3 piece wing or aggressive track wing? Also carbon splitter up front or no?