Alex Rodriguez UCF10 Build thread.
05-04-14, 07:39 PM
#76
damn... only $3800? for that car that's a steel. here in KS you would be lucky to even get ok looking wheels on a 90-94 LS400 at stock higth. your car is killer! im shure you could list it for $5000 and get every penny of 5k.
btw... thanks for the lip stats
btw... thanks for the lip stats
08-05-15, 07:35 AM
#79
Driver School Candidate
Updates coming
coilovers are here they are in pretty good condition they even came with the original instructions and stickers not bad for $350 compared to megans and bc for $900.
instaled the wheels on so we can see what a 18x11 and 18x12.5 fits without the flares and fronts seem doable but the rears are not going to happen. edit..disregard the gun on the reservoir
steering wheel is on, i am going more for that GT style than Vip.
now on to fit the fender flares. Note the fronts is easy actually plenty of room after the cut but rears are a pain. i cut the quarter then bend them up and sealed with 3m window seal in the summer when i get ready to paint the car they will be welded.
temp tape
havent adjusted height but tucks the wheels in well
Now time to get the ride height i need. I do not like the oil pan location on this car. Its crazy low i cant believe how low it is so i am creating a skid pan for it next week then i will go lower.
coilovers are here they are in pretty good condition they even came with the original instructions and stickers not bad for $350 compared to megans and bc for $900.
instaled the wheels on so we can see what a 18x11 and 18x12.5 fits without the flares and fronts seem doable but the rears are not going to happen. edit..disregard the gun on the reservoir
steering wheel is on, i am going more for that GT style than Vip.
now on to fit the fender flares. Note the fronts is easy actually plenty of room after the cut but rears are a pain. i cut the quarter then bend them up and sealed with 3m window seal in the summer when i get ready to paint the car they will be welded.
temp tape
havent adjusted height but tucks the wheels in well
Now time to get the ride height i need. I do not like the oil pan location on this car. Its crazy low i cant believe how low it is so i am creating a skid pan for it next week then i will go lower.
08-05-15, 03:59 PM
#81
Driver School Candidate
Saving up the rest of the money. Have half right now. It would be sept by the time I would be able to buy them from you. Wife gave me a time frame lol. How much would shipping be to 21040?
08-05-15, 04:13 PM
#82
Driver School Candidate
Thread
Thread Starter
Forum
Replies
Last Post
350z
LS - 1st and 2nd Gen (1990-2000)
940
09-07-22 12:18 PM
smokincigs
LS - 1st and 2nd Gen (1990-2000)
9
04-20-11 08:01 PM
