list looks good but I see nothing for engine management, are you going to stock ecu it cause thats the worst thing you can plan to do. I would consider the tt ecu mod or going standalone for control over fuel and timing, the stock ecu is horrible with boost.
you can eliminate the heater core diverter but expect your a/c to be much less cold in the summer. It doesn't affect performance so might as well leave it there and the vsv unless you are going for a full tuck or as little as possible.
another vac line I would run is if you are on the stock intake manifold, run a line from the top of the throttle body (the right most vac nipple when looking from drivers side at it) and run this to the butterfly valve in the stock intake manifold. there is a little wastegate looking thing in the middle under the Y part, connect this to manifold vacuum (that port on the throttle body) and it will help you spool faster without having all the rest of the ACIS canister stuff on the lower runners (I am assuming you took it out already). connecting this line will give you long runners whenever in vacuum (more torque = more spool), and as soon as you cross into boost it gives you short runners = best for max hp which is what you want for the top end.
If you just leave it disconnected you get short runner all the time, which means you loose out on extra torque below 4000 rpm's, and with the stock intake since you have it you might as well take the free power and run the vac line.
1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others)
2003 Lexus GX470 AWD (Lifted w/285's on Tundra wheels)
Before doing any business with Lextech Lighting, note they are not
a CL vendor.
Please read one of the current review threads about them
Then see current CL vendors for your cluster and lighting services!!!