When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
how difficult is it to remove the spoiler? Thats my next project.... Did u cut any wires etc?
It's easy. For mine it was just 4, 10mm bolts and I just snipped the wire they ran to the brake light. As I showed earlier, it leaves holes in the trunk lid. I'll need to get those addressed at some point.
The passenger side, farthest back bolt was stripped so I had to end up yanking it off and essentially ripping a hole in the bottom of the fiberglass spoiler, which in turn compromised the deck lid and it lifted a bit. I've got my PDR coming soon to address a couple door dings. I'm hoping he can even out the deck lid a bit incise I ever decide to get the holes filled and the deck lid re sprayed.
funny, i just saw this thread. I am the current owner of Saddle's GGP SD. I am selling this car and moving on to something bigger as my family grows. Car has been a dream to drive.
It's easy. For mine it was just 4, 10mm bolts and I just snipped the wire they ran to the brake light. As I showed earlier, it leaves holes in the trunk lid. I'll need to get those addressed at some point. The passenger side, farthest back bolt was stripped so I had to end up yanking it off and essentially ripping a hole in the bottom of the fiberglass spoiler, which in turn compromised the deck lid and it lifted a bit. I've got my PDR coming soon to address a couple door dings. I'm hoping he can even out the deck lid a bit incise I ever decide to get the holes filled and the deck lid re sprayed.
Yeah I was going to ask this question too. My light is out but I'm thinking about installing a new one but I didn't know where it was spliced too. The 3rd brake light or tail light. Any idea? I think it's spliced to the left tail light after reading past threads but there was never a definite answer. My third brake light doesn't work anymore. There isn't any power coming to the socket. I verified it with a test light.
Glad to see you're back. I was seriously considering buying your old 300 that is now for sale again with ~30k more miles. Wish I would've. Can't wait to see what you have planned.
funny, i just saw this thread. I am the current owner of Saddle's GGP SD. I am selling this car and moving on to something bigger as my family grows. Car has been a dream to drive.