PaCowboy

iTrader: (6)

Hey guys after getting a good deal on this car it's finally time to start the build with the help of supra dr. Here are a few pics of the car and parts. I will post the whole parts list later tonite.

JesLet

iTrader: (19)

Look at those goodies

JesLet

iTrader: (19)

I have the same downpipe, I welded the Marmon flange right onto that flange, so no cutting.

PaCowboy

iTrader: (6)

Ya I was thinking about doing the same. I'm not a fan of the Marmon flange.

PaCowboy

iTrader: (6)

The parts breakdown
Supra store quicksilver BW S366 kit
-supra store manifold
-BW S366 .96 ar
-tial 44mm gate
-tial bov
- dump tube
-Titan 3 inch dp
- phr 3 inch intake pipe and filter
Greddy profec b boost controller
Greddy turbo timer
Aem V2
Aem wideband O2 uego setup
3400 stall converter
4 inch IC with 3 inch piping
New trans cooler
Phr stage 2 fuel system
- ID 850 inj
- 2 walbro gss341 255 lph pumps
- phr fuel rail 17.5mm
- all braided lines and fittings -6an
- aeromotive fpr
- fpr gauge

JesLet

iTrader: (19)

I have the same Tial 44, i have all the springs. They are color coded.

So let say if I want 10 psi, and it calls for 2 springs, I should join those 2 springs together, right?

PaCowboy

iTrader: (6)

No you can only use one spring at a time.

lilSCsteve

iTrader: (71)

Nice, this is going to be an awesome build bro! Keep us posted?

steve

soarer13oy

iTrader: (13)

You can use multiple springs buddy. Have fun with the build.

PaCowboy

iTrader: (6)

Didn't know that. Thanks

PaCowboy

iTrader: (6)

Check this site out for spring combos. I was unaware of the spring combos until soarer mentioned it.
http://www.verociousmotorsports.com/...ings-MV-S-MV-R

tjmhillz

iTrader: (6)

Wow this is going to be one sick build.

PaCowboy

iTrader: (6)

Thanks gonna be a fun time. Or a nightmare. Lol

Highway

GL nice product to start with!

PaCowboy

iTrader: (6)

Thank you I'll keep this thread updated