my 98 GS400 in vegas
#122
thanks man!!!
might be getting my Kbreak bumper sooner than i thought, well see whats up. I'm back to full time at school and only 18 hours a week at work but well see if i can work some things out
oh yeah, about month ago I wore through my brake hardline underneath the car, i ended up cuttig the old line out and double flaring a new line in, so that fixed my leaking brake fluid issue!
might be getting my Kbreak bumper sooner than i thought, well see whats up. I'm back to full time at school and only 18 hours a week at work but well see if i can work some things out
oh yeah, about month ago I wore through my brake hardline underneath the car, i ended up cuttig the old line out and double flaring a new line in, so that fixed my leaking brake fluid issue!
#123
i forgot to add this too:
I bought a radio from the junkyard a few months ago and its done nothing but sit in storage, well i decided to pull it out and throw it on my car, to my surprise the LCD is perfect!
I also finally replaced the crappy battery that came with the car when i bought it
New Moog tie rod's
and grinding some things for spacers, my specs now are 18x9.5 -10 and 10.5 -0, what are positive offsets?! lol. and for your information, my studs still exceed the whole wheel nut length.
and in the process of double flaring my brake hardlines.
honestly upnext is most likely going to be rack bushings and motor mounts!
I bought a radio from the junkyard a few months ago and its done nothing but sit in storage, well i decided to pull it out and throw it on my car, to my surprise the LCD is perfect!
I also finally replaced the crappy battery that came with the car when i bought it
New Moog tie rod's
and grinding some things for spacers, my specs now are 18x9.5 -10 and 10.5 -0, what are positive offsets?! lol. and for your information, my studs still exceed the whole wheel nut length.
and in the process of double flaring my brake hardlines.
honestly upnext is most likely going to be rack bushings and motor mounts!
Last edited by SC4Paulo; 02-02-15 at 12:13 AM.
#124
2/18/15 update
Did my oil change, resurfaced my brake rotors and work, threw on some wagner thermoquiet pads, and washed the car after a night of wet session drifting haha gotta do the steering rack bushings and order my new front tires probably within this week. Serial Nine toe arms within this month as well, gotta get that rear alignment straight!
Did my oil change, resurfaced my brake rotors and work, threw on some wagner thermoquiet pads, and washed the car after a night of wet session drifting haha gotta do the steering rack bushings and order my new front tires probably within this week. Serial Nine toe arms within this month as well, gotta get that rear alignment straight!
#126
by the time summers hits i gotta do it though ended up finding another hold in my brake hardline, got that taken care of and my brake lines tucked up and away, i don't think my trans line is leaking anymore so all i gotta worry about is the oil pan gasket again. Until i buy new motor mounts the rear gasket will keep breaking from smashing onto the crossmember, but out of the 5 quarts or so i put int he car i pulled out 4.5 so im happy. yeah i forgot to add a quart last time oops. lol
#127
5% Club. Killing it!!!
iTrader: (15)
i gotta do my coolant flush and fan switch too been lazy, lol
by the time summers hits i gotta do it though ended up finding another hold in my brake hardline, got that taken care of and my brake lines tucked up and away, i don't think my trans line is leaking anymore so all i gotta worry about is the oil pan gasket again. Until i buy new motor mounts the rear gasket will keep breaking from smashing onto the crossmember, but out of the 5 quarts or so i put int he car i pulled out 4.5 so im happy. yeah i forgot to add a quart last time oops. lol
by the time summers hits i gotta do it though ended up finding another hold in my brake hardline, got that taken care of and my brake lines tucked up and away, i don't think my trans line is leaking anymore so all i gotta worry about is the oil pan gasket again. Until i buy new motor mounts the rear gasket will keep breaking from smashing onto the crossmember, but out of the 5 quarts or so i put int he car i pulled out 4.5 so im happy. yeah i forgot to add a quart last time oops. lol
thanks do the DIY i found on lexis.com for the coolant flush it went pretty well... the block bolts were the hardest to get to... also did the tranny drain and fill 2qts... 8 or nine of those and i should have new fluid in there...
#129
You should grab the motor mounts from Sewell before they stop online ordering on March 1st.. I went a head and bought the mounts just to have and a few gaskets... probably will stock up on filters next week. They will honor all shipments they said until that date.
thanks do the DIY i found on lexis.com for the coolant flush it went pretty well... the block bolts were the hardest to get to... also did the tranny drain and fill 2qts... 8 or nine of those and i should have new fluid in there...
thanks do the DIY i found on lexis.com for the coolant flush it went pretty well... the block bolts were the hardest to get to... also did the tranny drain and fill 2qts... 8 or nine of those and i should have new fluid in there...
Danny, I was grinding the stock studs because they were too long and kept the wheel from mounting onto the spacer, its perfectly safe though because on my nut i have all threads threaded through. We just grinded the excess thread poking passed the nut.
#135
Driver School Candidate
Hey bro would you be interested in buying my quad projector setup will come with 4 ballasts setup. Pm me if interested also got figs engineering front and rear adjustable sway bar end links with less than 1k.