JesLet

iTrader: (19)

I calibrated the Digital Dakota SGI-5 to work with my GM speed sensor and I finally did it! I used my cellphone GPS to match the one on my speedo.

Much thanks to turbodremz for helping

JesLet

iTrader: (19)

Here's the link for cluster resistor mod and GM 2-wire speed sensor

https://www.clublexus.com/forums/per...or-sender.html

stockhatch

iTrader: (12)

Hmmm, did you visually check to see if the valve is opening now? If it's not, bypass the vsv and put the vacuum source right on the actuator to make sure the signal and diaphragm are good. If it opens then, you will need to verify the vsv wiring.

stockhatch

iTrader: (12)

What percentage adjustment range does that Dakota box support? I am wondering if I can find a box that will adjust signal enough to convert my kph dash to mph...

JesLet

iTrader: (19)

You can give it a try.. Here's the instruction manual, I calibrated on OUT1 and it won't go down on speed anymore, so i tried OUT2 and i ended up using OUT5.

http://www.dakotadigital.com/pdf/sgi-5.pdf

JesLet

iTrader: (19)

I got the tach and speedo fixed now I am doing the AIRBAG light. I am trying to diagnose what caused the light to turn on before clearing it.

According to this link, I should clear the airbag light only if i have a code 22.
http://lextech.org/forums/index.php?topic=9.0

When I wire TC and E1 as per instruction, my CRUISE and ABS are blinking intermittently. AIBAG light is still on and not blinking, so this means it is not code 22.

Should I clear it anyway and maybe buy another spare of airbag haha

JesLet

iTrader: (19)

I tried to clear the airbag light with 3 wires and a toggle switch and light is still on. I tried about 5 times and gave up. I probably take the bulb off grrrrrrr

megomaniac

When do we get to find out how much hp/tq your transmission is reliable at?

CatManD3W

iTrader: (18)

More videos of the SC in action.....PLEASE......Lets hear that BW

drifterx27

iTrader: (1)

Just went through your thread. A bunch of work for sure. Good job so far, keep it up!

KahnBB6

iTrader: (5)

Love how close the car has come to completion, JesLet! And the AR-5 is shifting and cruising just fine now? You've put an excellent example here for the community to see how it's done!

PoGikoSc4

iTrader: (17)

Whut up D!? Any update on your SC brothuh!? i hope all is good man..

JesLet

iTrader: (19)

Thanks

Yes, shifts like butter. Kept my R154 for rebuild later if i blow this one up.
Still running lol... been busy working on the other car...






No videos, i'd like to though. I have 700 miles on this, pretty satisfied with Aristo ECU, might sell my MAP ECU 3.

CatManD3W

iTrader: (18)

Looks like you got yourself a set of wheels for the SC as well....Varrstoen ES7

gerrb

iTrader: (34)

hhhmmm been busy with that IS300 huh ? You can now send me your 2jzgte harness so I can look at it. You said you have an odb1 harness right ? And you have an odb2 car right ?

Don't forget to send that bottle of Patron too. I am out of stock...lmaol. J/K

Damn, before I forget . How is my 2jzge short block ? I hope it isn't rusty yet .