Another GTE Swap...
#17
Sorry...I saw your first request. But, I wanted to get links...
I checked out 3 places.
Brian at:
http://www.prolinkjapan.com/
S&O Teck
Stan: 754-422-4796
I purchased the clip from...
http://www.jdmcityautoparts.com/
I checked out 3 places.
Brian at:
http://www.prolinkjapan.com/
S&O Teck
Stan: 754-422-4796
I purchased the clip from...
http://www.jdmcityautoparts.com/
#23
Driver School Candidate
Join Date: Apr 2013
Location: FL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
#24
Driver
iTrader: (4)
I actually got in contact with with him and he's going to send me the wiring info. I'm going to use the help harness and run the standalone aem. They sell a plug n play kit here http://www.dezod.com/pd_dezod_motorsports_aem_ems.cfm
#26
Lead Lap
iTrader: (2)
Great work man, i might have to bring you mine to you lol, scared to drive it around because i dont wanna brake anything need some motor repairs. Question on the water i saw you listed part number: 16100-49846 but i cant seem to find it anywhere. Sewell sent me this :
http://lexus.sewellparts.com/accesso...1998/4475.html
Is it the same?
http://lexus.sewellparts.com/accesso...1998/4475.html
Is it the same?
#30
Everything is good. I don't post updates here often...throw a pic up on IG sometimes.
Not to much has changed. I've been busy working on other projects.
Here are some updates since the last time I posted....
Aristo radiator went out. I knew it needed to be replaced since the time I did the swap. Upgraded to an aluminum one.
Around that time I picked up a set of front and rear TOM's braces, as well as a little floor brace.
Suspension updates were next. Coilovers, RCA's, FIGS products, brakes, and wheels.
Initially I went with SAGE RCA's front and rear. I did not like the rear design, so I sold those, and switched to FIGS there as well.
How it sits now.
I have to fix the paint peeling on the rear bumper, then next is some engine upgrades.
Not to much has changed. I've been busy working on other projects.
Here are some updates since the last time I posted....
Aristo radiator went out. I knew it needed to be replaced since the time I did the swap. Upgraded to an aluminum one.
Around that time I picked up a set of front and rear TOM's braces, as well as a little floor brace.
Suspension updates were next. Coilovers, RCA's, FIGS products, brakes, and wheels.
Initially I went with SAGE RCA's front and rear. I did not like the rear design, so I sold those, and switched to FIGS there as well.
How it sits now.
I have to fix the paint peeling on the rear bumper, then next is some engine upgrades.
Last edited by AWDtoyota; 09-03-17 at 08:26 PM.