CatManD3W SC300 Ongoing Build...
#481
#482
I just finished up installing the passenger seat but I choose to go with wedge engineering bracket and slider....I must say that the seat is solid and does not move....
The wedge engineering bracket and slider sits lower.....looks like I will be ordering the wedge engineering bracket and slider as well for drivers side so they match..
Sparco Slider and bracket will up for sale....PM me if you want it
The wedge engineering bracket and slider sits lower.....looks like I will be ordering the wedge engineering bracket and slider as well for drivers side so they match..
Sparco Slider and bracket will up for sale....PM me if you want it
Last edited by CatManD3W; 03-06-15 at 04:01 PM.
#487
Driver School Candidate
Join Date: Nov 2007
Location: Pennsylvania
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
The front seats look good in there man. I'd like to see what you come up with for the rear seat delete. I had thought about doing a rear delete in my IS300 but I think with it being a 4 door it would seem a little weird.
#490
Thanks....I have finally ordered the supra radiator shroud and also will be installing a BCC from MVP motorsports...see how much room i have left on the 440s till i lean out....at 14psi ,I am reading low 10.2-10.8..on AFR..still pretty rich...see if it can go up to 16psi....
I really do not want wire in resistor pack for 550cc Supra low impedance injectors..... I might just buy the high impedance sard ones that are drop in for Aristo
I really do not want wire in resistor pack for 550cc Supra low impedance injectors..... I might just buy the high impedance sard ones that are drop in for Aristo
Last edited by CatManD3W; 03-18-15 at 07:48 PM.
#491
Finally ordered and installed Supra radiator shroud...I had to make 2 brackets for top portion of shroud since I am using SC radiator....You can see the one in the pic it will be painted black
Also installed ARP wheel studs on both front hubs....
Next items on the list are to install MVPMotorsports BCC, order CROW 5 pt harnesses and begin work on rear seat delete.....
Also installed ARP wheel studs on both front hubs....
Next items on the list are to install MVPMotorsports BCC, order CROW 5 pt harnesses and begin work on rear seat delete.....
Last edited by CatManD3W; 03-30-15 at 01:28 PM.