CatManD3W SC300 Ongoing Build...
#157
Hey guys I attempted to start the car today...First ran into a bad battery and replaced that with new....I made a video please watch and let me know...Im thinking it isnt getting spark but im not sure...
https://www.youtube.com/watch?v=iaVg...ature=youtu.be
https://www.youtube.com/watch?v=iaVg...ature=youtu.be
#159
Super Moderator
iTrader: (34)
^^^ +1
Catmand3w - sorry missed your call..been busy , had to bring my son in law to the hospital for an emergency and am still waiting here. As 97-sc300 had said, check if you smell fuel or have spark first . If you have both then it's something else.
Video sounds like you either have no fuel being injected or no spark ...
Catmand3w - sorry missed your call..been busy , had to bring my son in law to the hospital for an emergency and am still waiting here. As 97-sc300 had said, check if you smell fuel or have spark first . If you have both then it's something else.
Video sounds like you either have no fuel being injected or no spark ...
#160
Checked plugs.....I am not getting any spark....I turned key to on position and checked Coil #1 and I am not getting any reading on multimeter.....Also I cannot smell fuel when I remove the spark plug...
Not getting any spark or fuel into cylinders.....
Also I wanted to indicate that my intake manifold is powdercoated could there be a grounding issue?
Looking for some advice on where to start troubleshooting...
Not getting any spark or fuel into cylinders.....
Also I wanted to indicate that my intake manifold is powdercoated could there be a grounding issue?
Looking for some advice on where to start troubleshooting...
Last edited by CatManD3W; 04-03-14 at 09:42 PM.
#162
Sending my ECU off to Gerrb so he can check it in one of his cars....
#165
Got the lip mounted and sanded....Just need to add some paint to it...I kinda like the look of the bolt heads on the lip gives it a nascar look lol...
I am going to finish the lip with roll on bed liner that I have leftover from my truck....It goes on thick and has a textured finish so the lip doesn't have to be perfectly smooth...
I am going to finish the lip with roll on bed liner that I have leftover from my truck....It goes on thick and has a textured finish so the lip doesn't have to be perfectly smooth...