Dsrxloreto's weak build thread
#106
Driver
Thread Starter
thanks a lot man! i really appreciate it
what i did was cut a piece of heater hose just like the diy write up said to do in the sticky section.
heres the link https://www.clublexus.com/forums/ls4...ml#post7357209 i hope it works out for you
heres the link https://www.clublexus.com/forums/ls4...ml#post7357209 i hope it works out for you
#107
Driver
Thread Starter
There a huge car show that happens once a year in the san francisco that some of my friends put together called wekfest.So the night before, Gio aka superfutura, and thomas aka speed_addict, dropped of their cars at my buddies detail shop to get washed before the show.
all the way from texas, thomas' supercharged gs400 on ssr GT3's
also from texas, from futura brake, gio's ls430 on oz futura's
and my pos, being painted on by graffiti artist "girafa"
be sure to check out my buddy joey's blog at www.stickydiljoe.com for coverage of the event!
all the way from texas, thomas' supercharged gs400 on ssr GT3's
also from texas, from futura brake, gio's ls430 on oz futura's
and my pos, being painted on by graffiti artist "girafa"
be sure to check out my buddy joey's blog at www.stickydiljoe.com for coverage of the event!
Last edited by dsrxloreto; 08-07-13 at 08:46 AM.
#111
Driver
Thread Starter
#112
Driver
Thread Starter
so this past weekend, we installed my airrex struts, and accuair management. This was our first time doing an air install, and honestly it was that bad. The accuair kits are complete, and installation is very basic. Total labor time was about 10 hours, andd that includes: breaks, lunch, and f'ing around.
I also forgot to mention that we did this on the ground in front of my house lol
fronts installed
rears installed, we also threw on my megan camber arms, traction arms, and toe arms which i had purchased previously.
and heres a random picture of the UL rear seat brackets and junk.
the outcome.....
later on today i have an appoointment for an alignment. hopefully i can get more negative camber with these arms, and get these wheels to tuck
I also forgot to mention that we did this on the ground in front of my house lol
fronts installed
rears installed, we also threw on my megan camber arms, traction arms, and toe arms which i had purchased previously.
and heres a random picture of the UL rear seat brackets and junk.
the outcome.....
later on today i have an appoointment for an alignment. hopefully i can get more negative camber with these arms, and get these wheels to tuck
#117
Driver
Thread Starter
thanks boo!
i got it set to 5.5 but still doesnt tuck, they asked if i wanted to do more neg camber but i pussied out bc i didnt want to be flying through tires. =(
im just trying to catch up to you bro!
thanks a lot man! i really like what youve done with your car as well
thanks a lot man! i really like what youve done with your car as well