My 97 RSP Soarer
#46
Lead Lap
Thread Starter
LOTS of updates
Progress has been slow. Mostly because of funds! But progress is progress
As stated before, picked up some Honda S2K Seats. Havent been installed yet...
Following 97-SC300s great thread, I removed the stock, auto transmission tunnel and proceeded to install the MKIV 6MT tunnel. I did things slightly differently and didnt paint the tunnel. My friend who is a qualified panel beater helped me and suggested that it was not needed.
Then the getrag and RPS twin clutch were installed by a local shop
As stated before, picked up some Honda S2K Seats. Havent been installed yet...
Following 97-SC300s great thread, I removed the stock, auto transmission tunnel and proceeded to install the MKIV 6MT tunnel. I did things slightly differently and didnt paint the tunnel. My friend who is a qualified panel beater helped me and suggested that it was not needed.
Then the getrag and RPS twin clutch were installed by a local shop
#47
Lead Lap
Thread Starter
#48
Lead Lap
Thread Starter
Installed the HKS Hipermax IV GT and Whiteline swaybars (front end). Those HKS' are bloody amazing qualityyyy
Picked up a MKIV TRD Front Strut brace from GameOn Motorsport (also provided me with the RPS). Another sexy piece of engineering!
The stance with the front end done...these are the coils the way they came out of the box. I adjusted them later to raise the front lol
Picked up a MKIV TRD Front Strut brace from GameOn Motorsport (also provided me with the RPS). Another sexy piece of engineering!
The stance with the front end done...these are the coils the way they came out of the box. I adjusted them later to raise the front lol
#49
Lead Lap
Thread Starter
#50
Lead Lap
Thread Starter
RPS Goodness mmmmm
Dynamatted a fair bit of the interior
Installed some factory black rear cloth seats I picked up from Japan
Lastly received a sample set of Custom Soarer / SC keys for testing from Mark's Engineering. I had one of them cut to see how it went, worked well. Definitely going to pre-order the Titanium ones!
Dynamatted a fair bit of the interior
Installed some factory black rear cloth seats I picked up from Japan
Lastly received a sample set of Custom Soarer / SC keys for testing from Mark's Engineering. I had one of them cut to see how it went, worked well. Definitely going to pre-order the Titanium ones!
Thread
Thread Starter
Forum
Replies
Last Post
2GSC300
2Gen GS430 / 400/ 300 Classifieds (98-05)
1
06-13-12 01:32 PM