after weeks and weeks looking for a sc300, i finally found one that was 300+ miles away from me. me and couple of buddys went down to so cal to check it out and finally made the purchased.
here are the picture the day i picked it up
some parts i got for it
xs power turbo manifold
tial 44mm wastegate
the plan is gonna be a simple and budget na-t, stock motor with a tt headgasket and arp headstuds, with a 272 cams, ill be running e85 w/ dual denso pumps -8 feeding 1000cc injectors -6 back to the tank. ill also be running a th400 to support the power goal
hope u guys enjoy
This ad is not displayed to registered members. Register your free account today and become a member on Club Lexus!
Stock headgasket will be fine wirh the proper fuel e85 or race gas.
You will run out of fuel around 26/27 psi with the 1000cc.
Do u plan on running a ffim? Because that exhaust manifold with the Turbo you are running will not clear the stock ge throttle body.
The turbo compressor housing will not clear the #1runner on that exhaust manifold it will need some modification.
thanks for the info on the injectors, i could learn alot from u guys. and yes im gonna run a xspower ffim as for the turbo manifold i am gonna add a flange to clear #1 runner and try to clock it a lil to see if i can clear the dizzy as well
We dont have alot of camshaft options with the distributor in place.
There is a company that csn regrind your stock cams up to 280 , I can give you the info if you are interested.
My buddy Ryan (rywire) knows sheepy who works at web cams I know they can regrind the stock cams.. I have not yet talk to them about it since I don't think my build will be done early to mid next year..but those were my plans.. Care to pm me the info anyways
been busy, i didnt have time to do anything to my car, it was jus sitting outside of my house collecting dust. recently i started making progress towed it over to a friend house for him to modify the turbo manifold so the s372 turbo will clear #1 runner and dizzy